Service and Adjustments, Clean Under Drive Cover

CLEAN UNDER DRIVE COVER

Clean under drive cover at least twice a season. Scrape un- derside of cover with putty knife or similar tool to remove any build-up of trash or grass on underside of drive cover.

SERVICE AND ADJUSTMENTS

CAUTION: TO AVOID SERIOUS INJURY, BEFORE PERFORMINGANYSERVICE OR ADJUSTMENTS:

1.Release control bar and stop engine.

2.Make sure the blade and all moving parts have completely stopped.

3.Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.

LAWN MOWER

TO ADJUST CUTTING HEIGHT

See “TO ADJUST CUTTING HEIGHT” in the Operation section of this manual.

MOWING	MOWING
POSITION	POSITION
HAIRPIN
COTTER	HANDLE
	HANDLE
MOUNTING	BRACKET
PIN
LOW POSITION	HIGH POSITION

FIG. 15

REAR DEFLECTOR

The rear deﬂ ector, attached between the rear wheels of your mower, is provided to minimize the possibility that objects will be thrown out of the rear of the mower into the operator's mowing position. If the deﬂ ector becomes damaged, it should be replaced.

LOWER HANDLE

TO ADJUST HANDLE (See Figs. 14 thru 16)

The handle can be mounted in a high or low position. The mounting holes in the bottom of lower handle are off center for raising or lowering the handle.

1.Remove upper handle and all wire tie(s) securing cable(s) to lower handle.

2.Remove hairpin cotters from lower handle bracket mounting pin.

3.Squeeze lower handle in to remove it from mounting pins.

4.Turn lower handle over to raise or lower handle.

5.Squeeze lower handle in and position holes onto mounting pins on handle bracket.

6.Reassemble upper handle and all parts removed from lower handle.

SQUEEZE
TO ADJUST
LOWER HANDLE
MOUNTING PIN
HANDLE	HAIRPIN
BRACKET	COTTER

ROTATE

FIG. 16

ENGINE

Maintenance, repair, or replacement of the emission con- trol devices and systems, which are being done at the customers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer's service outlet.

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment.

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR NEARESTAUTHORIZED SERVICE CENTER, WHICH HAS PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY NECESSARY ADJUSTMENTS.

FIG. 14

7021P specifications

The Husqvarna 7021P is a powerful and efficient gas-powered lawn mower that stands out for its robust performance and user-friendly features. Designed for residential use, this mower combines power, precision, and convenience to help homeowners achieve the perfect lawn.

At the heart of the Husqvarna 7021P is a reliable 160cc gas engine, which delivers ample power for cutting through thick grass and tackling uneven terrain. This engine is designed to start easily and provide consistent performance, ensuring that the mower operates smoothly during each mowing session. The 7021P features a 21-inch cutting deck, making it ideal for medium-sized yards, allowing users to cover more ground with fewer passes.

One of the standout features of the Husqvarna 7021P is its 3-in-1 cutting system. This versatile system gives users the option to mulch, rear bag, or side discharge the clippings, offering flexibility based on personal preference and lawn care needs. Mulching is particularly beneficial as it recycles the grass clippings back into the soil, promoting healthy grass growth and reducing waste.

The mower is equipped with a dual-lever height adjustment system, allowing users to easily set the cutting height to their desired level. This feature provides a range of cutting heights, accommodating different grass types and conditions.

Additionally, the Husqvarna 7021P features durable wheels that provide excellent traction and maneuverability. The front wheels are 8 inches, while the rear wheels are 11 inches, allowing for smooth navigation over various terrains. The mower also includes an ergonomically designed handle, which not only enhances user comfort but also folds down for easy storage.

A thoughtful design characteristic of the 7021P is its easy-access fuel tank, which simplifies refueling during use. Moreover, the mower's lightweight construction makes it easy to maneuver and transport, ensuring that mowing is not only efficient but also an enjoyable experience.

In summary, the Husqvarna 7021P is a well-rounded lawn mower that showcases a blend of power, versatility, and convenience. Equipped with a reliable engine, a 3-in-1 cutting system, height adjustment capabilities, and ergonomic features, it is designed to meet the needs of homeowners who seek a reliable tool for maintaining a beautiful lawn. Whether tackling small patches or larger areas, the Husqvarna 7021P is built to deliver excellent results.