Husqvarna 965069703 manual Assembly, Fitting the loop handle, Fitting the trimmer head

Page 10

ASSEMBLY

Fitting the loop handle

•Position the handle on the shaft. Note that the handle must be mounted below the arrow on the shaft.

•Fit the screw, securing plate and wing nut as shown in the diagram.

•Tighten the wing nut.

Fitting the trimmer head

When fitting the cutting attachment it is extremely important that the raised section on the drive disc/support flange engages correctly in the centre hole of the cutting attachment. If the cutting attachment is fitted incorrectly it can result in serious and/or fatal personal injury.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Fitting the trimmer guard and trimmer head

•Fit the correct trimmer guard (A) for use with the trimmer head.

Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.

H

H

•To dismantle, follow the instructions in the reverse order.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 223L KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentStop switch Machine′s safety equipmentThrottle lock Vibration damping system Cutting attachment guardMuffler Locking nut Cutting equipmentTrimmer head Fitting the trimmer head AssemblyFitting the loop handle Fitting the trimmer guard and trimmer headFuel Handling Fuel safetyFuel Fueling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping General working instructions Basic safety rulesWorking Techniques Basic working techniquesGrass trimming with a trimmer head TrimmingMaintenance CarburetorMuffler Fine adjustment of the idle speed TCorrectly adjusted carburetor High speed jet HSpark plug Cleaning the air filterCooling system Air filterBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsPage S35 ´z+R=¶5Q¨ T35 1150072-95 ´z+R=¶5Q¨ ´z+R=¶5Q¨

965069703 specifications

The Husqvarna 965069703 is a powerful and versatile chainsaw designed to meet the demands of both professionals and outdoor enthusiasts. Engineered with advanced technology and robust components, this chainsaw is ideal for a variety of cutting tasks, from pruning and trimming to felling larger trees.

One of the standout features of the Husqvarna 965069703 is its reliable 2-stroke gas engine. This engine is not only efficient but also designed to provide lower emissions, aligning with modern environmental standards. This characteristic ensures that users can operate the chainsaw with minimal impact on the surrounding ecosystem while still achieving high performance.

The chainsaw features an Easy Start system, which simplifies the starting process. This technology reduces the effort needed to start the engine, making it accessible even for those who may not have extensive experience with chainsaws. Additionally, the air injection system works to extend the air filter life by removing larger dust and debris particles before they reach the filter. This helps maintain optimal engine performance over time.

In terms of safety, the Husqvarna 965069703 is equipped with a chain brake that quickly halts the chain's movement in case of kickback. This feature is crucial for preventing accidents and ensuring a safer cutting experience. Moreover, the low vibration technology incorporated into the design helps reduce operator fatigue, allowing for longer periods of use without discomfort.

The chainsaw is also equipped with a tool-less chain tensioning system, which provides quick and easy adjustments to the chain tension without the need for additional tools. This ensures that users can maintain optimal cutting performance and efficiency during operation.

Another significant characteristic of the Husqvarna 965069703 is its durable construction. Built with high-quality materials, this chainsaw is capable of withstanding the rigors of professional use and harsh outdoor conditions. The ergonomic design further enhances user comfort and control, which can lead to better results during intricate cutting tasks.

In summary, the Husqvarna 965069703 stands out for its powerful engine, easy start capability, enhanced safety features, and durable construction. These characteristics make it an excellent choice for both casual users and professionals seeking a reliable and efficient chainsaw. Whether for landscaping, property maintenance, or forestry work, this chainsaw delivers performance and ease of use, making it a valuable addition to any toolkit.
Top Page Image Contents