Husqvarna 965069703 manual Maintenance, Carburetor

Page 17

MAINTENANCE

Carburetor

Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in.To ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period, ask your dealer/service workshop (who will have a rev counter at their disposal) to adjust your carburettor.

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Function

•The carburetor governs the engine’s speed via the throttle control. Air and fuel are mixed in the carburetor. The air/ fuel mixture is adjustable. Correct adjustment is essential to get the best performance from the machine.

•The setting of the carburetor means that the engine is adapted to local conditions, for example, the climate, altitude, fuel and the type of 2-stroke oil.

•The carburetor has three adjustment controls: L = Low speed jet

H = High speed jet

T = Idle adjustment screw

•The L and H-jets are used to adjust the supply of fuel to match the rate that air is admitted, which is controlled with the throttle. If they are screwed clockwise the air/fuel ratio becomes leaner (less fuel) and if they are turned anti- clockwise the ratio becomes richer (more fuel). A lean mixture gives a higher engine speed and a rich mixture gives a lower engine speed.

•The T-screw regulates the throttle setting at idle speed. If the T-screw is turned clockwise this gives a higher idle speed; turning it anti-clockwise gives a lower idle speed.

Basic setting

•The basic carburetor settings are adjusted during testing at the factory. The basic setting is richer than the optimal setting and should be maintained for the first few hours the machine is in use. The carburettor should then be finely adjusted. Fine adjustment should be carried out by a skilled technician.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti- clockwise until the cutting attachment stops.

Rec. idle speed 2700 rpm

Recommended max. speed: See the Technical data section.

WARNING! If the idle speed cannot be

!adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired.

Fine adjustment

•When the machine has been ”run-in” the carburetor should be finely adjusted. The fine adjustment should be carried out by a qualified person. First adjust the L- jet, then the idling screw T and then the H-jet.

Conditions

•Before any adjustments are made, make sure that the air filter is clean and the air filter cover is fitted. If you adjust the carburettor when the air filter is dirty it will result in a leaner mixture when the filter is finally cleaned. This can lead to serious engine damage.

•Carefully turn both jets, L and H, so that they are midway between fully screwed in and fully screwed out.

•Do not attempt to adjust the L and H jets beyond either stop as this could cause damage.

•Now start the machine according to the starting instructions and let it warm up for 10 minutes.

Low speed jet L

Try to find the highest idling speed, turning the low speed needle L clockwise respectively counter-clockwise. When the highest speed has been found, turn the low speed needle L 1/ 4 turn counter-clockwise.

+ 1/4

L

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti- clockwise until the cutting attachment stops.

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 223L Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lock Machine′s safety equipmentStop switch Muffler Cutting attachment guardVibration damping system Trimmer head Cutting equipmentLocking nut Fitting the loop handle AssemblyFitting the trimmer head Fitting the trimmer guard and trimmer headFuel Fuel safetyFuel Handling Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniquesTrimming Grass trimming with a trimmer headCarburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TMuffler High speed jet HCooling system Cleaning the air filterSpark plug Air filterBevel gear Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementPage S35 ´z+R=¶5Q¨ T35 1150072-95 ´z+R=¶5Q¨ ´z+R=¶5Q¨

965069703 specifications

The Husqvarna 965069703 is a powerful and versatile chainsaw designed to meet the demands of both professionals and outdoor enthusiasts. Engineered with advanced technology and robust components, this chainsaw is ideal for a variety of cutting tasks, from pruning and trimming to felling larger trees.

One of the standout features of the Husqvarna 965069703 is its reliable 2-stroke gas engine. This engine is not only efficient but also designed to provide lower emissions, aligning with modern environmental standards. This characteristic ensures that users can operate the chainsaw with minimal impact on the surrounding ecosystem while still achieving high performance.

The chainsaw features an Easy Start system, which simplifies the starting process. This technology reduces the effort needed to start the engine, making it accessible even for those who may not have extensive experience with chainsaws. Additionally, the air injection system works to extend the air filter life by removing larger dust and debris particles before they reach the filter. This helps maintain optimal engine performance over time.

In terms of safety, the Husqvarna 965069703 is equipped with a chain brake that quickly halts the chain's movement in case of kickback. This feature is crucial for preventing accidents and ensuring a safer cutting experience. Moreover, the low vibration technology incorporated into the design helps reduce operator fatigue, allowing for longer periods of use without discomfort.

The chainsaw is also equipped with a tool-less chain tensioning system, which provides quick and easy adjustments to the chain tension without the need for additional tools. This ensures that users can maintain optimal cutting performance and efficiency during operation.

Another significant characteristic of the Husqvarna 965069703 is its durable construction. Built with high-quality materials, this chainsaw is capable of withstanding the rigors of professional use and harsh outdoor conditions. The ergonomic design further enhances user comfort and control, which can lead to better results during intricate cutting tasks.

In summary, the Husqvarna 965069703 stands out for its powerful engine, easy start capability, enhanced safety features, and durable construction. These characteristics make it an excellent choice for both casual users and professionals seeking a reliable and efficient chainsaw. Whether for landscaping, property maintenance, or forestry work, this chainsaw delivers performance and ease of use, making it a valuable addition to any toolkit.
Top Page Image Contents