Husqvarna 327RJX-series manual Maintenance, Carburettor

Page 21

MAINTENANCE

Carburettor

Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. To ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period, ask your dealer/ service workshop (who will have a rev counter at their disposal) to adjust your carburettor.

WARNING! The complete clutch cover

! and shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Function

•The carburettor governs the engine’s speed via the throttle control. Air and fuel are mixed in the carburettor. The air/fuel mixture is adjustable. Correct adjustment is essential to get the best performance from the machine.

•Adjusting the carburettor means that the engine is adapted to local operating conditions, e.g. climate, altitude, petrol and the type of 2-stroke oil.

•The carburettor has three adjustment controls: L = Low speed jet

H = High speed jet

T = Idle adjustment screw

•The L and H-jets are used to adjust the supply of fuel to match the rate that air is admitted, which is controlled with the throttle. If they are screwed clockwise the air/fuel ratio becomes leaner (less fuel) and if they are turned anti-clockwise the ratio becomes richer (more fuel). A lean mixture gives a higher engine speed and a rich mixture gives a lower engine speed.

•The T-screw regulates the throttle setting at idle speed. If the T-screw is turned clockwise this gives a higher idle speed; turning it anti-clockwise gives a lower idle speed.

Basic setting

•The basic carburettor settings are adjusted during testing at the factory. The basic setting is richer than the optimal setting and should be maintained for the first few hours the machine is in use. The carburettor should then be finely adjusted. Fine adjustment should be carried out by a skilled technician.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti-clockwise until the cutting attachment stops.

Rec. idle speed: 2700 rpm

Recommended max. speed: See the Technical data section.

WARNING! If the idle speed cannot be

! adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired.

Fine adjustment

•When the machine has been ”run-in” the carburettor should be finely adjusted. The fine adjustment should be carried out by a qualified person. First adjust the L- jet, then the idling screw T and then the H-jet.

Conditions

•Before any adjustments are made, make sure that the air filter is clean and the air filter cover is fitted. If you adjust the carburettor when the air filter is dirty it will result in a leaner mixture when the filter is finally cleaned. This can lead to serious engine damage.

•Carefully turn both jets, L and H, so that they are midway between fully screwed in and fully screwed out.

•Do not attempt to adjust the L and H jets beyond either stop as this could cause damage.

•Now start the machine according to the starting instructions and let it warm up for 10 minutes.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti-clockwise until the cutting attachment stops.

English – 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 327RJX-series Symbols KEY to SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closerContents Dear Customer IntroductionWhat is what on the trimmer? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system MufflerLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades General rulesTrimmer head Assembly Fitting the J-handleAssembling the cutting equipment Fitting other guards and cutting attachments Fuel safety Fuel HandlingFuel Mixing FuellingCheck before starting Starting and StoppingStarting and stopping StartingStarter cord around your hand StoppingBasic safety rules Working TechniquesGeneral working instructions Basic working techniques Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburettor MaintenanceCorrectly adjusted carburettor Fine adjustment of the idle speed TLow speed jet L High speed jet HCooling system MufflerSpark plug Is damaged it should be replacedAir filter Cleaning the air filterBevel gear Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataApproved accessories Type Cutting attachment guard, Art. no EC-declaration of conformityApplies to Europe only Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page 1150990-26

327RJX-series specifications

The Husqvarna 327RJX-series is a powerful and versatile line of string trimmers designed for both commercial landscapers and serious home gardeners. Renowned for their ergonomic design and advanced technology, these models provide superior performance and reliability.

One of the standout features of the 327RJX-series is its lightweight construction, making it easy to maneuver during prolonged use. Weighing only about 10.8 pounds, the trimmer allows users to work with less fatigue, enhancing productivity and comfort. The adjustable handle enables customization for various operators, improving overall control and precision while trimming.

Equipped with a robust 27cc 2-stroke engine, the Husqvarna 327RJX delivers exceptional power while maintaining fuel efficiency. This design ensures that users can tackle even the most challenging landscapes, from dense grass to thick weeds, with ease. The engine features a reliable start system, minimizing the challenges associated with starting your trimmer, particularly during colder weather conditions.

One of the key technologies incorporated in the 327RJX-series is the X-Torq engine, which reduces harmful emissions by up to 75% compared to conventional 2-stroke engines. This eco-friendly design not only helps to protect the environment but also enhances fuel efficiency, allowing for longer operating times without the need for frequent refueling.

Additionally, the 327RJX-series boasts an Auto Return Stop Switch, which automatically resets the trimmer to the "on" position after use. This feature streamlines the starting process, ensuring that users can get back to work without fumbling with the switch.

The trimmer is also designed with an advanced air filtration system that extends the life of the engine by reducing wear and tear. The easy-to-replace air filter enhances the machine's longevity and performance, ensuring that it continues to deliver exceptional results season after season.

In summary, the Husqvarna 327RJX-series offers a perfect combination of power, efficiency, and user-friendly design. With its lightweight frame, X-Torq engine technology, and thoughtful features like the Auto Return Stop Switch and advanced air filtration system, this series is an ideal choice for anyone looking for a high-quality string trimmer that can handle rigorous tasks while providing comfort and ease of use. Whether you're a professional landscaper or a dedicated gardener, the 327RJX-series stands out as a reliable tool that meets the demands of modern lawn care.
Top Page Image Contents