Husqvarna 327RJX-series manual Fuel Handling, Fuel safety

Page 14

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

! Bear in mind the risk of fire, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are

! highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

3% (1:33)

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 327RJX-series Operator of the machine must Ensure, while working, that no KEY to SymbolsSymbols Persons or animals come closerContents Introduction Dear CustomerWhat is WHAT? What is what on the trimmer?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard MufflerLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment General rulesTrimmer head Assembling the cutting equipment AssemblyFitting the J-handle Fitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingStopping Starter cord around your handGeneral working instructions Basic safety rulesWorking Techniques Grass trimming with a trimmer head Grass clearing using a grass bladeBasic working techniques TrimmingCutting SweepingMaintenance CarburettorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HSpark plug MufflerCooling system Is damaged it should be replacedBevel gear Cleaning the air filterAir filter Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApplies to Europe only Approved accessories Type Cutting attachment guard, Art. noEC-declaration of conformity Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page 1150990-26

327RJX-series specifications

The Husqvarna 327RJX-series is a powerful and versatile line of string trimmers designed for both commercial landscapers and serious home gardeners. Renowned for their ergonomic design and advanced technology, these models provide superior performance and reliability.

One of the standout features of the 327RJX-series is its lightweight construction, making it easy to maneuver during prolonged use. Weighing only about 10.8 pounds, the trimmer allows users to work with less fatigue, enhancing productivity and comfort. The adjustable handle enables customization for various operators, improving overall control and precision while trimming.

Equipped with a robust 27cc 2-stroke engine, the Husqvarna 327RJX delivers exceptional power while maintaining fuel efficiency. This design ensures that users can tackle even the most challenging landscapes, from dense grass to thick weeds, with ease. The engine features a reliable start system, minimizing the challenges associated with starting your trimmer, particularly during colder weather conditions.

One of the key technologies incorporated in the 327RJX-series is the X-Torq engine, which reduces harmful emissions by up to 75% compared to conventional 2-stroke engines. This eco-friendly design not only helps to protect the environment but also enhances fuel efficiency, allowing for longer operating times without the need for frequent refueling.

Additionally, the 327RJX-series boasts an Auto Return Stop Switch, which automatically resets the trimmer to the "on" position after use. This feature streamlines the starting process, ensuring that users can get back to work without fumbling with the switch.

The trimmer is also designed with an advanced air filtration system that extends the life of the engine by reducing wear and tear. The easy-to-replace air filter enhances the machine's longevity and performance, ensuring that it continues to deliver exceptional results season after season.

In summary, the Husqvarna 327RJX-series offers a perfect combination of power, efficiency, and user-friendly design. With its lightweight frame, X-Torq engine technology, and thoughtful features like the Auto Return Stop Switch and advanced air filtration system, this series is an ideal choice for anyone looking for a high-quality string trimmer that can handle rigorous tasks while providing comfort and ease of use. Whether you're a professional landscaper or a dedicated gardener, the 327RJX-series stands out as a reliable tool that meets the demands of modern lawn care.
Top Page Image Contents