Alpine Complete Guide for Your IVA-W502E

Antenna Receptacle

S Video Input Connector

Input the video signal.

Connect to the output terminal of S video of connected devices.

Video Input Connector (AUX INPUT) (Yellow)

Input the video.

Audio Input Connectors (AUX INPUT)

RED is right and WHITE is left input the audio.

Video Output Connector (AUX OUTPUT) (Yellow)

Output the video.

Audio Output Connectors (AUX OUTPUT)

RED is right and WHITE is left output the audio.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.

Remote Control Input Lead (White/Brown)

Connect the external Alpine product to the remote control output lead.

Reverse Lead (Orange/White)

Use only when a back-up camera is connected. Connect to the plus side of the car’s reverse lamp. This lamp illuminates when the transmission is shifted into reverse (R).

With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R).

Monitor Control Lead (White/Pink)

Connect this to the Monitor Control Lead of the touch panel- compatible rear monitor.

USB Connector

AUX I/O Camera In Connector

FULL SPEED™ Connection Cable (KCE-422i) (Sold Separately)

Steering Remote Control Interface Connector

To steering remote control interface box.

For details about connections, consult your nearest Alpine dealer.

iPod Direct Connector

iPod control signals.

Connect this to an iPod or an optional Bluetooth Box, using the FULL SPEED™ Connection Cable (KCE-422i) (sold separately).

To use a hands-free mobile phone, an optional Bluetooth Box connection is required. For details on connection, refer to the Owner’s Manual of the Bluetooth Box.

CAMERA Input Connector

Use when connecting a back-up camera.

RGB Input Terminal

Connect this to the RGB output terminal of the Navigation System.

Digital Output Terminal (Optical)

Use when combining fiber optic digital input compatible products. Be sure to use the Optical Digital Cable (KWE-610A) (sold separately) only.

Ai-NET Connector

Connect this to the output or input connector of another device (CD Changer, Equalizer, etc.) equipped with Ai-NET.

•You can input TV/video sound by connecting an optional Ai-NET/RCA Interface cable (KCA-121B) to this component.

•Be sure to set “Setting the Connected Head Unit (MODEL SETUP)” to “DVD CHG”, when the DHA-S690 is connected.

Rear Output/Input RCA Connectors

It can be used as Rear Output or Input RCA Connectors.

Front Output/Input RCA Connectors

It can be used as Front Output or Input RCA Connectors.

Subwoofer RCA Connectors

RED is right and WHITE is left.

System Switch

When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. When no device is connected, leave the switches in the NORM position.

•Do not make the two switches to different settings.

•Be sure to turn the power off to the unit before changing the switch position.

Power Supply Connector

Ai-NET Cable (Included with CD Changer)

Remote Turn-On Lead (Blue/White)

Connect this lead to the remote turn-on lead of your amplifier or signal processor.

Power Antenna Lead (Blue)

Connect this lead to the +B terminal of your power antenna, if applicable.

•This lead should be used only for controlling the vehicle’s power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc.

Audio Interrupt In Lead (Pink/Black)

Parking Brake Lead (Yellow/Blue)

Connect this lead to the power supply side of the parking brake switch to transmit the parking brake status signals to the IVA-W502E.

Switched Power Lead (Ignition) (Red)

Connect this lead to an open terminal on the vehicle’s fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position.

Battery Lead (Yellow)

Connect this lead to the positive (+) post of the vehicle’s battery.

Fuse Holder (10A)

76-EN