Playback

1 Touch [SOURCE] on the main source screen.

The SOURCE selection screen is displayed.

2 Touch [DISC].

The display shows the DISC mode screen.

When a CD/MP3/WMA/AAC is inserted into the DISC SLOT of the IVA-W502E, with the label side facing up, the unit starts to play the CD/MP3/WMA/AAC.

3 Touch [] or [] to select the desired track (file).

Returning to the beginning of the current track (file):

Touch [].

Fast reverse :

Touch and hold [].

Advancing to the beginning of the next track (file) :

Touch [].

Fast forward :

Touch and hold [].

To pause playback

Touch [ / ].

Touching [/ ] again will resume playback.

Inserting/Ejecting a Disc

Refer to “Inserting/Ejecting a Disc” (page 11).

The IVA-W502E model includes a built-in MP3/WMA/AAC unit. You can play CD-ROMs, CD-Rs, and CD-RWs containing MP3/WMA/ AAC files on this unit. Use the format compliant with this unit.

For further information about playing or storing MP3/WMA/AAC files, refer to pages 16 and 17 before using the unit.

WMA format files that are protected by DRM (Digital Rights Management), AAC format files that have been purchased from iTunes Music Store and files that are copy-protected (copyright protection) cannot be played back on this unit.

The unit can play discs containing both audio data and MP3/WMA/ AAC data.

The track display for CD audio data playback is the track numbers recorded on the disc.

Three-inch (8 cm) CDs can be used.

“Playing MP3/WMA/AAC Data (FILE PLAY MODE)” is mentioned on page 31.

If an MP3/WMA/AAC disc with many files and folders is played, it takes a little longer than normal to start playback.

Touch [ ] to activate the search mode. For operations, refer to “Search Function” on page 25.

However, the search mode function does not work in the CD changer mode.

The playback time may not be correctly displayed when a VBR (Variable Bit Rate) recorded file is played back.

Repeat Play

Touch [] to play back repeatedly the track currently being played.

The track (file) will be played repeatedly.

Touch [] again and select OFF to deactivate Repeat play.

CD: RPT RPT DISC*1 (off) RPT

MP3/WMA/AAC:

1Touch [P1/2]*3 to change the function guide.

2Touch [] and select the desired Repeat play.

RPT RPT FLDR*2 RPT DISC*1 (off) RPT

*1 If a CD Changer or an MP3 compatible CD changer is connected and the RPT DISC mode is selected, the unit repeatedly plays back all tracks (files) on the disc selected.

*2 Only files in a folder are repeatedly played back.

*3 Display may vary depending on the connected devices.

M.I.X. (Random Play)

Touch [] during playback.

The tracks (files) on the disc will be played back in a random sequence.

To cancel M.I.X. play, touch [].

CD: M.I.X. M.I.X. ALL*1 (off) M.I.X.

MP3/WMA/AAC:

1Touch [P1/2]*4 to change the function guide.

2Touch [] and select the desired M.I.X. play.

M.I.X. FLDR*3 M.I.X.*2 (off) M.I.X. FLDR*3

*1 If a CD Changer equipped with the M.I.X. ALL function is connected, M.I.X. ALL will also be selectable.

In this mode, the tracks on all the CDs in the current magazine will be included in the random playback sequence.

*2 If an MP3 compatible CD changer is connected, all files in a disc are played back in random sequence, and playback shifts to the next disc.

*3 Only files in a folder are played back in random sequence in the M.I.X. FLDR mode.

*4 Display may vary depending on the connected devices.

If the search mode (page 25) is activated, the M.I.X. play mode will be cancelled.

Selecting Folders (concerning MP3/ WMA/AAC)

Touch FOLDER [ ] or [ ] to select the folder.

15-EN

Page 16
Image 16
Alpine IVA-W502E owner manual Playback, Repeat Play, X. Random Play, Selecting Folders concerning MP3/ WMA/AAC, 15-EN