Setting the Rear Camera Input
With a rear camera connected, rear view video is output to the monitor.
Setting item: CAMERA IN
Setting contents: OFF / NTSC / PAL
OFF: The CAMERA source is not displayed on the VISUAL selection screen.
NTSC/PAL: Even if the shift lever is not set to reverse (R), the rear pictures are output by selecting the CAMERA source.
•By shifting to reverse (R), the rear pictures are output.
This function is effective when the reverse wire is properly connected.
•To apply the setting, set to VISUAL in “Setting the VISUAL Soft Button” (page 37).
Setting the Navigation Mode
When you connect an optional navigation equipment, set it to ON.
Setting item: NAV. IN
Setting contents: OFF / ON
OFF: Navigation source is not displayed. The settings related to the navigation can not be changed from this unit.
ON: Navigation source is displayed.
Setting the Navigation Interruption
With an Alpine navigation system connected to the
Setting item: NAV. MIX
Setting contents: OFF / ON
OFF: The navigation interruption mode is turned off.
ON: The navigation interruption mode is on.
See “Adjusting NAV. MIX Level” under “Adjusting the Audio” on page 25 to set the navigation interruption volume level.
•The volume level for voice prompts during navigation guidance is set by adjusting the volume while the prompts are announced. When the announcement finishes, the normal audio volume and the previous audio screen are restored. The voice prompt volume is always at or below the current listening volume. If a navigation announcement cuts in while adjusting the audio level, it always resets to the current level regardless of the audio level setting.
•This setting is effective when NAV. IN of SYSTEM list screen is ON.
Setting the AUX Mode
Setting item: AUX IN
Setting contents: OFF / ON / DVD / GAME / TV /
OFF: AUX source is not displayed.
ON: AUX source is displayed.
•OFF is not displayed when the optional DVD player or DVD changer is connected. During SYSTEM setup, although the AUX name can be changed, it is not displayed on the source selection screen.
•When OFF is selected, the settings related to AUX cannot be changed from this unit.
•The selected source name is displayed instead of AUX source name. Select SOURCE to switch to the guide function of each mode.
•Only when an Alpine TV tuner is connected, you can operate the displayed function guide from this unit.
Adjusting the External Input Audio Level
After setting to ON in “Setting the AUX Mode”, this setting can be carried out.
Setting item: AUX IN LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
Switching the Visual Input Signal System
After setting to ON in “Setting the AUX mode”, this setting can be carried out.
Setting item: AUX IN SIGNAL
Setting contents: NTSC / PAL
•The video input type can be changed.
Setting the Picture Output
Outputs the picture of the source selected on the
Setting item: AUX OUT
Setting contents: OFF / ON
OFF: The “RSE” item is not displayed on the SOURCE selection screen.
ON: The “RSE” item is displayed on the SOURCE selection screen.
Touch [RSE] to change to the REAR selection screen, and then touch the desired source. The selected source picture is output on the rear monitor.
