How to use a Seal

If A is used for installation:

Affix the seal so that mounting holes B and C are covered.

If B is used for installation:

Affix the seal so that mounting holes A and C are covered.

If C is used for installation:

Affix the seal so that the mounting holes A and B are covered.

Installing the Face Plate

*2 If A is used, the supplied face plate may be mounted.

If B is used, the face plate must be modified before installing it. To modify the face plate, consult your Alpine dealer.

If C is used, the face plate cannot be mounted. Consult your Alpine dealer.

Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis.

For the screw marked “*2”, use an appropriate screw for the chosen mounting location.

Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the IVA-W502E. Connect all other leads of the IVA-W502E according to details described in the CONNECTlONS section.

5 Slide the IVA-W502E into the dashboard until it clicks. This ensures that the unit is properly locked and will not accidentally come out from the dashboard.

Removal

1.Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.

This unit

Bracket keys (Included)

2. Pull the unit out, keeping it unlocked as you do so.

<JAPANESE CAR>

Take the face plate off, and secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the car’s chassis.

4

Hex Nut (M5)

*2

Metal

Mounting

Screw

Bolt Stud

Attach the Original Mounting Bracket to each side of the IVA-W502E, using the screws supplied with IVA-W502E.

Screws (M5 × 8) (Included)

Ground Lead

*

Mounting

Strap*1

Bracket

Chassis

Face Plate (Included)

Ground Lead

This unit

Chassis

73-EN

Page 74
Image 74
Alpine IVA-W502E 73-EN, How to use a Seal, Installing the Face Plate, Pull the unit out, keeping it unlocked as you do so