Husqvarna 323RII, 327RDX, 327RX manual Fuel Handling, Fuel safety

Page 17

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be fitted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

! Bear in mind the risk of fire, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are

! highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre

Two-stroke oil, litre

 

 

 

2% (1:50)

3% (1:33)

 

 

 

5

0,10

0,15

 

 

 

10

0,20

0,30

 

 

 

15

0,30

0,45

 

 

 

20

0,40

0,60

 

 

 

English – 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 323RII 327RX-series Symbols KEY to SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closerContents Dear Customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentCutting attachment guard Stop switchVibration damping system Quick releaseLocking nut Cutting equipment Cutting equipmentSharpening grass cutters and grass blades General rulesTrimmer head Sharpening the saw bladeFitting the handlebar 327Rx, 327RDx AssemblyFitting the handlebar 323RII Dismantling AssemblyAssembling and dismantling the two-piece shaft 327RDx Fitting the blade guard and saw blade Assembling the cutting equipmentFitting a blade guard, grass blade and grass cutter Fitting other guards and cutting attachments Standard harness Adjusting the harness and clearing sawSpreading the load on your shoulders Correct heightFuel Fuel safetyFuel Handling Mixing FuellingCheck before starting Starting and StoppingStarting and stopping StartingStarter cord around your hand For throttle handles with a start throttle lockStopping General working instructions Basic safety rulesWorking Techniques ABC of clearing Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass bladeGrass trimming with a trimmer head TrimmingSweeping CuttingCarburettor MaintenanceCorrectly adjusted carburettor Fine adjustment of the idle speed TLow speed jet L High speed jet HMuffler Adjusting the start throttle speedCooling system Cleaning the air filterBevel gear Air filterOiling the air filter Two-piece shaft 327RDxSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataEC-declaration of conformity Applies to Europe only Approved accessories TypePage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Page Page 1150989-26

323RII, 327RX, 327RDX specifications

The Husqvarna 327RDX, 323RII, and 327RX are powerful and versatile trimmers designed for both professional landscapers and passionate gardeners. Each model combines advanced technology with robust engineering to deliver exceptional performance and efficiency.

The Husqvarna 327RDX is equipped with a high-performance 25.4cc engine that delivers excellent power for demanding tasks. A unique feature of this model is its intuitive ergonomics, including a lightweight design and well-balanced body, which significantly reduces operator fatigue during extended use. The trimmer also features a high capacity fuel tank for longer operating periods without frequent refueling. The 327RDX is compatible with a range of Husqvarna attachments, enhancing its versatility for various landscaping tasks.

Next in line is the Husqvarna 323RII. This model is particularly known for its ease of use and excellent maneuverability. It also houses a powerful 25cc engine, ensuring that it delivers efficient cutting performance. One of its standout technologies is the X-Torq engine, which reduces fuel consumption and decreases emissions compared to standard 2-stroke engines. This not only benefits the environment but also reduces the operational costs for users. The 323RII is designed with an adjustable handlebar which provides comfort and allows for ideal positioning, making it easier to tackle hard-to-reach areas.

Lastly, the Husqvarna 327RX is a robust trimmer that is built to handle professional applications. It features a more powerful 27.6cc engine coupled with a heavy-duty cutting system, providing excellent performance when navigating through thick vegetation. The ergonomic design of the handle and the adjustable harness enable comfortable operation, making it suitable for long hours of work. The 327RX incorporates Smart Start technology, ensuring that the engine starts quickly with minimal effort, further enhancing user experience.

Overall, the Husqvarna 327RDX, 323RII, and 327RX are exemplary trimmers that harness innovative technology and thoughtful design. They offer reliability, power, and efficiency, making them ideal choices for anyone looking to maintain their outdoor spaces with precision and ease. Whether you choose the lightweight convenience of the 323RII or the robust performance of the 327RX, Husqvarna ensures that quality and performance are at the forefront of your gardening endeavors.
Top Page Image Contents