Husqvarna 327RDX, 327RX, 323RII manual Fuelling, Mixing

Page 18

FUEL HANDLING

Mixing

•Always mix the petrol and oil in a clean container intended for fuel.

•Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.

•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

 

!

WARNING! The catalytic converter

 

muffler gets very hot during and after

 

 

 

 

use. This also applies during idling. Be

 

 

aware of the fire hazard, especially when

 

 

working near flammable substances and/

 

 

or vapours.

 

 

 

Fuelling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

•Always use a fuel container with an anti-spill valve.

•Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

•Ensure that the fuel is well mixed by shaking the container before filling the tank.

18 – English

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 323RII 327RX-series Operator of the machine must Ensure, while working, that no KEY to SymbolsSymbols Persons or animals come closerContents Introduction Dear CustomerWhat is WHAT? What is what on the clearing saw?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutVibration damping system Stop switchCutting attachment guard Quick releaseLocking nut Sharpening grass cutters and grass blades Cutting equipmentCutting equipment General rulesSharpening the saw blade Trimmer headAssembly Fitting the handlebar 323RIIFitting the handlebar 327Rx, 327RDx Assembly Assembling and dismantling the two-piece shaft 327RDxDismantling Assembling the cutting equipment Fitting a blade guard, grass blade and grass cutterFitting the blade guard and saw blade Fitting other guards and cutting attachments Spreading the load on your shoulders Adjusting the harness and clearing sawStandard harness Correct heightFuel safety Fuel HandlingFuel Fuelling MixingStarting and stopping Starting and StoppingCheck before starting StartingFor throttle handles with a start throttle lock StoppingStarter cord around your hand Basic safety rules Working TechniquesGeneral working instructions ABC of clearing Forestry clearing using a saw blade Grass trimming with a trimmer head Grass clearing using a grass bladeBrush cutting with a saw blade TrimmingCutting SweepingMaintenance CarburettorLow speed jet L Fine adjustment of the idle speed TCorrectly adjusted carburettor High speed jet HAdjusting the start throttle speed MufflerBevel gear Cleaning the air filterCooling system Air filterTwo-piece shaft 327RDx Spark plugOiling the air filter Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type EC-declaration of conformity Applies to Europe onlyPage S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Page Page 1150989-26

323RII, 327RX, 327RDX specifications

The Husqvarna 327RDX, 323RII, and 327RX are powerful and versatile trimmers designed for both professional landscapers and passionate gardeners. Each model combines advanced technology with robust engineering to deliver exceptional performance and efficiency.

The Husqvarna 327RDX is equipped with a high-performance 25.4cc engine that delivers excellent power for demanding tasks. A unique feature of this model is its intuitive ergonomics, including a lightweight design and well-balanced body, which significantly reduces operator fatigue during extended use. The trimmer also features a high capacity fuel tank for longer operating periods without frequent refueling. The 327RDX is compatible with a range of Husqvarna attachments, enhancing its versatility for various landscaping tasks.

Next in line is the Husqvarna 323RII. This model is particularly known for its ease of use and excellent maneuverability. It also houses a powerful 25cc engine, ensuring that it delivers efficient cutting performance. One of its standout technologies is the X-Torq engine, which reduces fuel consumption and decreases emissions compared to standard 2-stroke engines. This not only benefits the environment but also reduces the operational costs for users. The 323RII is designed with an adjustable handlebar which provides comfort and allows for ideal positioning, making it easier to tackle hard-to-reach areas.

Lastly, the Husqvarna 327RX is a robust trimmer that is built to handle professional applications. It features a more powerful 27.6cc engine coupled with a heavy-duty cutting system, providing excellent performance when navigating through thick vegetation. The ergonomic design of the handle and the adjustable harness enable comfortable operation, making it suitable for long hours of work. The 327RX incorporates Smart Start technology, ensuring that the engine starts quickly with minimal effort, further enhancing user experience.

Overall, the Husqvarna 327RDX, 323RII, and 327RX are exemplary trimmers that harness innovative technology and thoughtful design. They offer reliability, power, and efficiency, making them ideal choices for anyone looking to maintain their outdoor spaces with precision and ease. Whether you choose the lightweight convenience of the 323RII or the robust performance of the 327RX, Husqvarna ensures that quality and performance are at the forefront of your gardening endeavors.
Top Page Image Contents