Husqvarna 333RJ, 335RJX-Series manual Cutting equipment, Locking nut

Page 9

GENERAL SAFETY PRECAUTIONS

If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

!converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin. Remember the risk of fire!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

!The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.) Tighten the nut using the socket spanner.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Cutting equipment

This section describes how to choose and maintain your cutting equipment in order to:

•Reduce the risk of blade thrust.

•Obtain maximum cutting performance.

•Extend the life of cutting equipment.

IMPORTANT!

Only use cutting attachments with the guards we recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check the correct way to load the cord and the correct cord diameter.

Keep the teeth of the blade correctly sharpened! Follow our recommendations. Also refer to the instructions on the blade packaging.

Maintain the correct blade setting! Follow our instructions and use the recommended file gauge.

WARNING! Always stop the engine before

!doing any work on the cutting attachment. This continues to rotate even after the throttle has been released. Ensure that the cutting attachment has stopped completely and disconnect the HT lead from the spark plug before you start to work on it.

WARNING! Using an incorrect cutting

!attachment or an incorrectly sharpened blade increases the risk of kickback.

Cutting equipment

Grass blades and grass cutters are intended for cutting coarse grass.

A trimmer head is intended for trimming grass.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 333RJ 335RJX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what on the clearing saw? What is WHAT?Personal protective equipment General Safety PrecautionsMachine′s safety equipment Stop switchThrottle lock Cutting attachment guard Vibration damping systemMuffler Cutting equipment Locking nutCutting equipment Trimmer head Sharpening grass cutters and grass bladesFitting the J-handle AssemblyAssembling the cutting equipment Fitting the guard extensionHook the blade guard/combination guard a onto Fuel safety Fuel HandlingFuel Mixing FuelingCheck before starting Starting and StoppingStarting and stopping StartingStopping Working Techniques Basic safety rulesGeneral working instructions Basic working techniquesGrass trimming with a trimmer head Grass clearing using a grass bladeCarburetor MaintenanceCorrectly adjusted carburetor Fine adjustment of the idle speed TLow speed jet L High speed jet HMuffler Cooling systemBevel gear Air filter Cleaning the air filterSpark plug Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementPage S35 095-.106 T35 ´z+R33¶5Q¨ Page 1150191-95 ´z+R33¶5Q¨ ´z+R33¶5Q¨
Related manuals
Manual 36 pages 4.91 Kb

333RJ, 335RJX-Series, 333RJ specifications

The Husqvarna 335RJx and 333RJ are powerful and versatile string trimmers designed for both professionals and passionate homeowners. These models boast impressive features and cutting-edge technologies that enable users to handle even the toughest grass and weeds with ease.

One of the standout features of the Husqvarna 335RJx and 333RJ is their lightweight design. Weighing in at just over 10 pounds, these trimmers are easy to maneuver, reducing user fatigue during extended use. The ergonomic handle design provides comfort and control, allowing for precise trimming in tight spaces and around obstacles without strain.

Equipped with a high-performance X-Torq engine, these models deliver superior power and fuel efficiency. This technology reduces harmful emissions, making them environmentally friendly while maintaining impressive performance. The engines are designed to provide more torque at low RPM, enhancing cutting efficiency and enabling users to tackle thicker vegetation without compromising speed.

Both models feature Husqvarna's Auto Return Stop Switch, which simplifies the starting process. The stop switch automatically returns to the ON position, ensuring that the trimmer is ready to go with minimal effort. This design reduces downtime and increases productivity, making the user experience more efficient.

The cutting equipment on the Husqvarna 335RJx and 333RJ is equally impressive. These trimmers come with a high-capacity trimmer head that allows for quick line replacement. The tap-and-go feature permits users to extend the line effortlessly by tapping the head on the ground, enhancing practicality during operation. Furthermore, the cutting width of 18 inches ensures that users can cover a large area in a shorter amount of time.

Durability is a key characteristic of these models. Constructed with high-quality materials, the trimmers are built to withstand rigorous usage, ensuring longevity and reliable performance. The double shoulder harness further distributes the weight evenly, providing additional support during operation and allowing for greater control while trimming.

In conclusion, the Husqvarna 335RJx and 333RJ offer a combination of power, efficiency, and user-friendly design. With their advanced engine technology, comfortable handling, and practical features, these string trimmers are ideal for anyone looking to maintain their landscape with ease and precision. Whether for professional landscaping or home gardening, these models stand out in delivering performance and reliability.
Top Page Image Contents