MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.
Maintenance | Daily | Weekly | Monthly | |
maintenance | maintenance | maintenance | ||
| ||||
|
|
|
| |
Clean the outside of the machine. | X |
|
| |
|
|
|
| |
Make sure the throttle trigger lock and the throttle function correctly from a |
|
|
| |
safety point of view. | X |
|
| |
|
|
|
| |
Check that the stop switch works correctly. | X |
|
| |
|
|
|
| |
Check that the cutting attachment does not rotate at idle. | X |
|
| |
|
|
|
| |
Clean the air filter. Replace if necessary. | X |
|
| |
|
|
|
| |
Check that the guard is undamaged and not cracked. Replace the guard if |
|
|
| |
it has been exposed to impact or is cracked. | X |
|
| |
|
|
|
| |
Check that the trimmer head is undamaged and not cracked. Replace the |
|
|
| |
trimmer head if necessary. | X |
|
| |
|
|
|
| |
Check that the locking nut of the cutting equipment is tighten correctly. | X |
|
| |
|
|
|
| |
Check that nuts and screws are tight. | X |
|
| |
|
|
|
| |
Check that there are no fuel leaks from the engine, tank or fuel lines. | X |
|
| |
|
|
|
| |
Check the starter and starter cord. |
| X |
| |
|
|
|
| |
Check that the vibration damping elements are not damaged. |
| X |
| |
|
|
|
| |
Clean the outside of the spark plug. Remove it and check the electrode |
|
|
| |
gap. Adjust the gap to 0.5 mm (.20”), or replace the spark plug. Check that |
|
|
| |
the spark plug is fitted with a suppressor. |
| X |
| |
|
|
|
| |
Clean the machines cooling system. |
| X |
| |
|
|
|
| |
Clean or replace the spark arrestor mesh on the muffler (only applies to |
|
|
| |
mufflers without a catalytic converter). |
| X |
| |
|
|
|
| |
Clean the outside of the carburettor and the space around it. |
| X |
| |
|
|
|
| |
Check that the bevel gear is filled |
|
|
| |
necessary using special grease. |
| X |
| |
|
|
|
| |
Check the fuel filter from contamination and the fuel hose from cracks or |
|
|
| |
other defects. Replace if necessary. |
|
| X | |
|
|
|
| |
Check all cables and connections. |
|
| X | |
|
|
|
| |
Check the clutch, clutch springs and the clutch drum for wear. Replace if |
|
|
| |
necessary by an autorized service workshop. |
|
| X | |
|
|
|
| |
Replace the spark plug. Check that the spark plug is fitted with a |
|
|
| |
suppressor. |
|
| X | |
|
|
|
| |
Check and clean the spark arrestor mesh on the muffler (only applies to |
|
|
| |
mufflers fitted with a catalytic converter). |
|
| X | |
|
|
|
|
22 – English