KEY to Symbols

Symbols

WARNING: Clearing saws, brush- cutters and trimmers can be dan- gerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

SHearing protection

SApproved eye protection

Max. speed of output shaft, rpm

Watch out for thrown objects and ricochets.

The operator of the machine must ensure, while working, that no persons or animals come closer than 50 feet (15 meters).

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non--slip boots.

Only use non--metallic, flexible cutting attachments, i.e. trimmer heads with trimmer line.

Only intended for trimmer heads.

Use unleaded or quality leaded gasoline and two--stroke oil mixed at a ratio of 2% (1:50).

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Stop the engine by pushing and holding the stop switch in the STOP position until the engine stops before carrying out any checks or maintenance.

Regular cleaning is required.

Visual check.

Approved eye protection must always be used.

115275126 Rev. 1 9/15/09

English--- 3