Husqvarna 327LD, 327LS manual Maintenance schedule, Maintenance Daily Weekly Monthly

Page 23

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Maintenance

Daily

 

Weekly

Monthly

maintenance

maintenance

maintenance

 

 

 

 

 

 

Clean the outside of the machine.

 

X

 

 

 

 

 

 

 

Make sure the throttle trigger lock and the throttle function

 

X

 

 

correctly from a safety point of view.

 

 

 

 

 

 

 

 

 

 

 

 

Check that the stop switch works correctly.

 

X

 

 

 

 

 

 

 

Check that the cutting attachment does not rotate at idle.

 

X

 

 

 

 

 

 

 

Clean the air filter. Replace if necessary.

 

X

 

 

 

 

 

 

 

Check that the guard is undamaged and not cracked. Replace

 

X

 

 

the guard if it has been exposed to impact or is cracked.

 

 

 

 

 

 

 

 

 

 

 

 

Check that the trimmer head is undamaged and not cracked.

 

X

 

 

Replace the trimmer head if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

Check that nuts and screws are tight.

 

X

 

 

 

 

 

 

 

Check that there are no fuel leaks from the engine, tank or fuel

 

X

 

 

lines.

 

 

 

 

 

 

 

 

 

 

 

 

Check the starter and starter cord.

 

 

X

 

 

 

 

 

 

Check that the vibration damping elements are not damaged.

 

 

X

 

 

 

 

 

 

Clean the outside of the spark plug. Remove it and check the

 

 

 

 

electrode gap. Adjust the gap to 0.5 mm (.20”), or replace the

 

 

X

 

spark plug. Check that the spark plug is fitted with a suppressor.

 

 

 

 

 

 

 

 

 

Clean the machine’s cooling system.

 

 

X

 

 

 

 

 

 

Clean or replace the spark arrestor screen on the muffler (only

 

 

X

 

applies to mufflers without a catalytic converter).

 

 

 

 

 

 

 

 

 

 

 

 

Clean the outside of the carburettor and the space around it.

 

 

X

 

 

 

 

 

 

Check that the bevel gear is filled three-quarters full with

 

 

X

 

lubricant. Fill if necessary using special grease.

 

 

 

 

 

 

 

 

 

 

 

 

Check the fuel filter from contamination and the fuel hose from

 

 

 

X

cracks or other defects. Replace if necessary.

 

 

 

 

 

 

 

 

 

 

 

 

Check all cables and connections.

 

 

 

X

 

 

 

 

 

Check the clutch, clutch springs and the clutch drum for wear.

 

 

 

X

Replace if necessary by an autorized service workshop.

 

 

 

 

 

 

 

 

 

 

 

 

Replace the spark plug. Check that the spark plug is fitted with a

 

 

 

X

suppressor.

 

 

 

 

 

 

 

 

 

 

 

 

Check and clean the spark arrestor screen on the muffler (only

 

 

 

X

applies to mufflers fitted with a catalytic converter).

 

 

 

 

 

 

 

 

 

 

 

 

English – 23

Image 23
Contents 327LS 327LDX-series Symbols KEY to SymbolsContents Dear customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentMuffler Stop switchCutting attachment guard Vibration damping systemCutting equipment Trimmer head Assembling and dismantling the two-piece shaft 327LDx AssemblyAssembly Fitting the loop handleFitting the trimmer guard and trimmer head Assembling the cutting equipmentFuel Fuel safetyFuel Handling Mixing FuelingStarting Starting and StoppingCheck before starting Starting and stoppingStopping General working instructions Basic safety rulesWorking Techniques Grass trimming with a trimmer head Basic working techniquesMuffler MaintenanceCarburetor Remember the risk of fire Cooling systemSpark plug Oiling the air filter Cleaning the air filterTwo-piece shaft 327LDx Air filterBevel gear Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical Data327LDx Powerhead model Accessories Art NoYour Warranty Rights and Obligations Emission Warranty Parts List Page S35 2,7mm 095-.106 25 m 15 cm T35, T35x T25 Page Page Page Original instructions 1153293-95