Husqvarna 952711948 manual Fuel Handling, Fuel safety

Page 11

FUEL HANDLING

Fuel safety

Never start the machine:

1.If you have spilled fuel on it. Wipe off the spillage and allow remaining fuel to evapo- rate.

2.If you have spilled fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3.If the machine is leaking fuel. Check regu- larly for leaks from the fuel cap and fuel lines.

Transport and storage

SStore and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked flames, for example, from electri- cal machinery, electric motors, electrical relays/switches or boilers.

SWhen storing and transporting fuel al- ways use approved containers intended for this purpose.

SWhen storing the machine for long peri- ods the fuel tank must be emptied. Con- tact your local petrol station to find out

where to dispose of excess fuel.

SEnsure the machine is cleaned and that a complete service is carried out before long--term storage.

SIn order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long--term storage, if the machine is not under close supervision and when performing

all service measures.

SSecure the machine during transport.

WARNING: Take care when han- dling fuel. Bear in mind the risk of fire, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two--stroke engine and must always be run using a mixture of petrol and two-stroke engine oil. It is important to accurately mea- sure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING: Fuel and fuel fumes are highly inflammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ven- tilation.

Petrol

CAUTION! Always use a good quality pet- rol/oil mixture (at least 90 octane).

Use low--emission petrol, also known as alkylate petrol, if it is available.

SThe lowest octane recommended is 90. If you run the engine on a lower octane than 90, it can result in knocking. This gives rise to a high engine temperature, which can result in serious engine damage.

SWhen working at continuous high revs, a higher octane rating is recommended.

Two-stroke oil

SFor best results and performance, use HUSQVARNA two--stroke oil, which is specially formulated for our two--stroke

engines. Mixture 1:50 (2%).

SIf HUSQVARNA two--stroke oil is not avail- able, you may use another two-stroke oil of good quality that is intended for air cooled engines. Contact your dealer when select-

ing an oil. Mixing ratio 1:33 (3%).

SNever use two--stroke oil intended for water--cooled outboard engines,

sometimes referred to as outboard oil.

SNever use oil intended for four--stroke engines.

 

Petrol,

Two-stroke oil, litre

 

litre

 

 

 

2% (1:50)

3% (1:33)

 

 

 

 

 

 

5

0,10

0,15

10

0,20

0,30

 

15

0,30

0,45

20

0,40

0,60

115299326 Rev. 2 7/15/10

English--- 11

Image 11
Contents EN 2-24 FR 25-47 ES Symbols Symbol ExplanationContents Know your trimmer What is WHAT?Personal protective equipment General Safety PrecautionsFirst AID KIT Machine’s safety equipmentThrottle lock-out ClothingMuffler Stop switchCutting attachment guard Trimmer head Cutting equipmentAssembling and dismantling the two--piece shaft AssemblyAssembly Fitting the loop handleFitting the trimmer guard and trimmer head Fuel Fuel safetyFuel Handling Mixing FuelingCold engine Starting and StoppingCheck before starting Starting and stoppingStopping Warm engineBasic working techniques Basic safety rulesWorking Techniques General working instructionsStop the machine immediately if anyone approaches ClearingCutting SweepingMuffler MaintenanceUnit/Maintenance Safety CarburetorAir filter Cleaning the air filterSpark plug Two--piece shaftBevel gear Maintenance Daily Weekly Monthly Maintenance Maintenance Maintenance scheduleTechnical data Technical DataEC Declaration of Conformity Only applies to Europe Declaration of ConformityType Attachments Part. noTrimmer Head Line Loading Instructions Plastic Blades Tri Cut

952711948 specifications

The Husqvarna 952711948 is a robust and versatile chainsaw designed for both professional and residential use. Renowned for its powerful performance and innovative technology, this chainsaw has garnered a reputation for reliability and efficiency. One of the standout features of the Husqvarna 952711948 is its lightweight design, making it easier to maneuver and handle during cutting tasks. This aspect is particularly appealing to users who may need to operate the tool for extended periods without experiencing excessive fatigue.

Equipped with a high-performance engine, the 952711948 delivers exceptional cutting power. The engine is engineered to provide optimum performance while minimizing fuel consumption and emissions, making it an environmentally friendly choice. The chainsaw features a durable and efficient cutting bar that is designed to withstand rigorous use, providing users with deep and precise cuts. Moreover, the chain speed is impressive, allowing for swift operation regardless of the material being tackled.

One of the key technological advancements in the Husqvarna 952711948 is the inclusion of LowVib technology. This feature significantly reduces vibrations experienced by the operator, enhancing comfort and control while using the tool. The ergonomic handle design further contributes to ease of use, offering a secure grip that boosts user confidence and stability even in challenging cutting scenarios.

Safety is a paramount concern for Husqvarna, and the 952711948 incorporates several safety features to protect the operator. The chainsaw is equipped with a chain brake system that automatically stops the chain in the event of kickback or unexpected movement, reducing the risk of accidents. Additionally, the tool is designed with easy-to-access controls, allowing users to initiate the tool or adjust settings with minimal hassle.

For maintenance, the Husqvarna 952711948 shines with its easy-access air filter and tool-free chain tensioning system. This design not only simplifies routine maintenance but also helps prolong the life of the chainsaw by ensuring optimal performance at all times.

In summary, the Husqvarna 952711948 is an exceptional chainsaw that combines power, comfort, and safety features. Whether you are a professional arborist or a homeowner looking for a reliable tool for yard maintenance, this chainsaw stands out as a top choice, engineered to meet the demands of its users while delivering outstanding performance. With its compelling blend of technology and construction quality, it has become a trusted companion for those who take on cutting tasks with confidence.