Installation

Locate the amplifier as close as possible to its final installation point. Allow access to the rear panel for making connections.

The MC-6 Multi-Channel Power Amplifier is convection cooled, eliminating the need for fan or forced-air cooling. When operating, the chassis should have at least two (2) inches of air space around the heatsink areas. Multiple chassis can be stacked vertically, facilitating an upward flow of warm air currents throughout the vertical heatsink areas. This upward flow must not be blocked or recirculated around the chassis if proper cooling is to be maintained.

Typical installations allow the amplifier to be rigidly coupled to a support structure or floor via the included spiked coupling supports. In carpeted installations, these supports provide excellent anchoring from the amplifier chassis to the rigid floor or sub-floor below. If there is concern about damage to the structure or floor’s finish, a coin can be placed beneath each spiked coupling support. In installations where the resonant properties of the supporting structure are poor, the amplifier chassis can be loosely coupled to the supporting structure via the compliant isolation interface pads. This will help to attenuate the transfer of vibration or resonant energy from the support structure to the amplifier chassis.

Rear Panel Power Connections

Important: Please strictly follow the steps in order as outlined below before operating your MC-6 Multi-Channel Power Amplifier.

1Verify that the VOLTS AC input identified on the rear panel near the AC input socket is the same as the AC mains voltage in your area. If the voltage does not match, do not connect the amplifier to AC power and contact your dealer immediately.

2Verify that the AC MAINS CIRCUIT BREAKER is closed (green color visible).

3Install the AC Power Cable between the amplifier and your AC mains outlet.

4Verify that the circuit breakers for channels 1, 2, 3, 4, 5, and 6 are closed (no white area visible on each breaker).

Note: If the amplifier is to be moved to another location, always place the unit in Standby mode before disconnecting the AC power cable from the AC mains wall outlet.

Never use the AC mains circuit breaker as a power switch to connect or disconnect the amplifier from AC mains power.

MC-6 specifications

The Link electronic MC-6 is an advanced multi-channel sound system controller designed for musicians, sound engineers, and music producers who require high-quality sound management and versatile control in their audio setups. Known for its innovative features and robust performance, the MC-6 stands out as a vital tool in both live sound and studio environments.

One of the principal features of the MC-6 is its ability to manage up to six audio channels simultaneously. This allows users to create custom mixes tailored to their specific needs, enabling precise control over each individual sound source. The user interface is designed for ease of use, with intuitive controls that allow for quick adjustments on-the-fly. This is a critical advantage during live performances where time is of the essence.

The MC-6 is equipped with cutting-edge digital signal processing technology. This feature enhances audio quality while providing tools for equalization, compression, and reverb. The onboard effects can significantly elevate the sound experience, offering flexibility in how audio is mixed and presented. Users can also store presets, which speeds up the setup process for recurring performances or recording sessions.

Another noteworthy characteristic of the MC-6 is its connectivity options. It supports a variety of input and output formats, including XLR, TRS, and USB connections, making it compatible with a wide range of industry-standard equipment. This versatility allows users to seamlessly integrate the MC-6 into any sound system configuration, whether in a club setting or a personal studio.

For added convenience, the MC-6 can also be controlled remotely through mobile devices or computers. This wireless capability is particularly valuable during live events, as it permits the sound engineer to make real-time adjustments from different locations in the venue. The connectivity also supports MIDI control, allowing the integration of external devices for enhanced sound manipulation.

Overall, the Link electronic MC-6 combines cutting-edge technology with user-friendly features, making it an ideal solution for those seeking to elevate their audio experiences. With its multi-channel management, digital signal processing, versatile connectivity, and remote control capabilities, the MC-6 is sure to meet the demands of any professional audio environment. This tool is poised to be a game-changer for anyone looking to refine their sound and enhance their overall audio production.