Use, Care, and Signal Connections

The Jeff Rowland Design Group MC-6 Power Amplifier has been designed with numerous protection circuits and to be able to operate at the highest level of performance in any normal operating situation. However, there are a few important use and care principles that must be kept in mind when operating the amplifier.

∙Do not expose the amplifier to rain, moisture, or excessively damp conditions.

∙Do not disconnect the amplifier from AC mains without first placing the amplifier in Standby mode.

∙The MC-6 Multi-Channel Power Amplifier must not be modified in any way, other than according to official service bulletins from Jeff Rowland Design Group. Otherwise, the factory warranty will be immediately voided.

∙The MC-6 Multi-Channel Power Amplifier can be operated at a nominal 100, 115, 200, or 230 volts AC. For this reason, you should first assure that the amplifier has been wired for the correct AC input voltage before operation.

∙As the MC-6 generates a significant amount of heat, it should not be placed in a cabinet or area where the heatsinks are not able to properly dissipate heat during operation. Please make sure adequate ventilation is provided.

∙To clean the MC-6 Multi-Channel Power Amplifier, use a soft cloth moistened with plain water. Never apply water, dusting sprays, solvents, abrasives, or cleaning fluids directly to the chassis!

∙When operating the MC-6, a properly grounded AC receptacle should be used. A potential shock hazard may result if the supplied 3-wire, grounded AC cord set ground terminal is defeated or lifted or the unit is connected to a 2-wire ungrounded AC outlet.

Signal Connections

The MC-6 Multi-Channel Power Amplifier offers unprecedented channel configuration capability and compatibility with associated audio components. When connecting or disconnecting speaker or interconnect cables, it is always necessary to place the amplifier in Standby mode (FRONT PANEL STANDBY/POWER BUTTON not illuminated or OFF).

Complete instructions for configuring and connecting the amplifier can be found in the next portion of this manual.

Please also note that any changes or updates to the manual will be posted on the Jeff Rowland Design Group web site at http://www.jeffrowland.com.

+Warning: Both positive and negative outputs are electrically

active with respect to chassis and/or system ground potential! Therefore, this amplifier cannot be used in certain loudspeaker switching configurations, such as those used in retail demonstrations. Failure to avoid these precautions can result in damage to the amplifier and will void the warranty.

MC-6 specifications

The Link electronic MC-6 is an advanced multi-channel sound system controller designed for musicians, sound engineers, and music producers who require high-quality sound management and versatile control in their audio setups. Known for its innovative features and robust performance, the MC-6 stands out as a vital tool in both live sound and studio environments.

One of the principal features of the MC-6 is its ability to manage up to six audio channels simultaneously. This allows users to create custom mixes tailored to their specific needs, enabling precise control over each individual sound source. The user interface is designed for ease of use, with intuitive controls that allow for quick adjustments on-the-fly. This is a critical advantage during live performances where time is of the essence.

The MC-6 is equipped with cutting-edge digital signal processing technology. This feature enhances audio quality while providing tools for equalization, compression, and reverb. The onboard effects can significantly elevate the sound experience, offering flexibility in how audio is mixed and presented. Users can also store presets, which speeds up the setup process for recurring performances or recording sessions.

Another noteworthy characteristic of the MC-6 is its connectivity options. It supports a variety of input and output formats, including XLR, TRS, and USB connections, making it compatible with a wide range of industry-standard equipment. This versatility allows users to seamlessly integrate the MC-6 into any sound system configuration, whether in a club setting or a personal studio.

For added convenience, the MC-6 can also be controlled remotely through mobile devices or computers. This wireless capability is particularly valuable during live events, as it permits the sound engineer to make real-time adjustments from different locations in the venue. The connectivity also supports MIDI control, allowing the integration of external devices for enhanced sound manipulation.

Overall, the Link electronic MC-6 combines cutting-edge technology with user-friendly features, making it an ideal solution for those seeking to elevate their audio experiences. With its multi-channel management, digital signal processing, versatile connectivity, and remote control capabilities, the MC-6 is sure to meet the demands of any professional audio environment. This tool is poised to be a game-changer for anyone looking to refine their sound and enhance their overall audio production.