Husqvarna 326RJX manual Cutting attachment guard, Vibration damping system, Muffler

Page 8

GENERAL SAFETY PRECAUTIONS

Cutting attachment guard

This guard is intended to prevent loose objects from being thrown towards the operator. The guard also protects the operator from accidental contact with the cutting attachment.

Check that the guard is undamaged and not cracked. Replace the guard if it has been exposed to impact or is cracked.

Always use the recommended guard for the cutting attachment you are using. See chapter on Technical data.

WARNING! Never use a cutting attachment

!without an approved guard. See the chapter on Technical data. If an incorrect or faulty guard is fitted this can cause serious personal injury.

Vibration damping system

Your machine is equipped with a vibration damping system that is designed to reduce vibration and make operation easier.

Use of incorrectly wound cord or an incorrect cutting attachment increases the level of vibration. See instructions under the heading Cutting equipment.

The machines vibration damping system reduces the transfer of vibration between the engine unit/cutting equipment and the machines handle unit.

Regularly check the vibration damping units for cracks or deformation.

Check that the vibration damping element is undamaged and securely attached.

WARNING! Overexposure to vibration can

!lead to circulatory damage or nerve damage in people who have impaired circulation. Contact your doctor if you experience symptoms of overexposure to vibration. Such symptoms include numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. The risk increases at low temperatures.

Muffler

The muffler is designed to keep noise levels to a minimum and to direct exhaust fumes away from the user. A muffler fitted with a catalytic converter is also designed to reduce harmful exhaust gases.

In countries that have a warm and dry climate there is a significant risk of fire. We therefore fit certain mufflers with a spark arrestor screen. Check whether the muffler on your machine is fitted with this kind of screen.

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

8 – English

1151472-95 Rev. 1 2009-01-16

Image 8
Contents 326RJX-series KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the trimmer?General Safety Precautions Personal protective equipmentThrottle lockout Machine′s safety equipmentStop switch Muffler Cutting attachment guardVibration damping system Cutting equipment Cutting equipmentLocking nut Sharpening grass cutters and grass blades Trimmer headAssembling the cutting equipment AssemblyFitting the J-handle Fitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Fueling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Basic safety rules Working TechniquesGeneral working instructions Basic working techniquesGrass clearing using a grass blade Grass trimming with a trimmer headSweeping Maintenance CarburetorHigh speed jet H Correctly adjusted carburetorMuffler Cleaning the air filter Cooling systemSpark plug Air filterBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataMANUFACTURER′S Warranty Coverage Federal and California Emissions Control Warranty Statement Super Auto 1151472-95 Rev Trimmy H Click Trimmy Hit Pro S35 ´z+RN¶5,¨ T35, T35x 1151472-95 ´z+SO=¶5O¨ ´z+SO=¶5O¨
Related manuals
Manual 36 pages 61.63 Kb