Husqvarna 326HS99, 326HS75 manual Start and Stop, Control before starting, Start and stop

Page 13

START AND STOP

Control before starting

•Inspect the working area. Remove objects that can be thrown.

• Check the blades. Never use blades that are dull, cracked or damaged.

• Check that the hedge trimmer is in full working order. Check that all nuts and bolts are tightened correctly.

•Make sure the gearbox is lubricated correctly. See the section ”Lubricating the blades”.

•Ensure the blades always stop when the engine is idling.

•Only use the machine for what it is intended for.

•Ensure that the handle and safety functions are in order. Never use a machine that lacks a part or has been modified outside of the specifications.

Start and stop

Start

Warm engine

IGNITION:

Set the stop switch to the start position.

CHOKE:

Set the choke control in the choke position and then back again to its original position (B)

In this way only the start throttle is applied with no choke.

AIR PURGE: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

B

!WARNING!

The gearbox and clutch drum must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

Always move the hedge trimmer about 3 metres from the filling position before the machine is started. Place the machine on a hard surface. Bear in mind that the blades could start to move when the engine starts. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.

Press the machine body against the ground using your left hand (NOTE! Do not use your foot). Grip the starter handle with your right hand and slowly pull the starter cord out until you feel some resistance, (the starter hooks grip) now quickly and powerfully pull the cord. Immediately press the choke control in when the engine fires and repeat until the engine starts. When the engine starts, quickly apply

Cold engine

IGNITION:

Set the stop switch to the start position.

CHOKE:

Set the choke control in the choke position (A).

The choke position is also the automatic start throttle position.

AIR PURGE: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

A

full throttle and the start throttle will automatically disengage.

NOTE! Do not pull the starter cord out completely and do not release the starter cord from the fully extended position. This can damage the hedge trimmer.

Stop

The engine is stopped by switching the ignition off using the stop switch.

English – 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents English Operators manual Carb II, EPASymbols Symbol ExplanationContents Personal protective eqipment Safety InstructionsMachine’s protective equipment Muffler Vibration damping systemCheck that the hand guard D is secured Blades Assembly of the catcher accessoryGearbox Start Fuel safety General safety instructionsTransport and storage Personal protection Safety instructions when using the hedge trimmerProtective instructions regarding the surroundings Protective instructions while workingBasic working techniques Protective instructions when work is completedWhat is what on the hedge trimmer? What is WHAT?Fuel mixture Fuel HandlingFuelling Control before starting Start and StopStart and stop StartCarburetor MaintenanceCorrectly adjusted carburetor Adjusting the idle speed, THigh speed needle H Spark plug Muffler Cooling systemCleaning the air filter Cleaning and lubricationAir filter GearboxDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data 326HS75 326HS99 Technical DataEmission Control Warranty Statement English ´+H!¶33¨ English 2002W01 114 00

326HS99, 326HS75 specifications

The Husqvarna 326HS75 and 326HS99 are two advanced hedge trimmers designed for both professional landscapers and dedicated gardeners. These models exhibit a fusion of power, durability, and cutting-edge technology, providing an efficient solution for maintaining hedges and shrubs.

One of the most notable features of both models is their powerful engine. The Husqvarna 326HS75 comes equipped with a 24.5 cc, 1.0 kW two-stroke engine, while the 326HS99 is powered by a more robust 27.6 cc engine, delivering 1.1 kW of power. This allows users to tackle even the most resilient hedges with ease, achieving clean, precise cuts without straining the machine.

The innovative design of the cutting system is another highlight. Both models feature double-sided blades, designed for optimal cutting efficiency. The 26-inch long blades provide an extended reach, ideal for reaching high or wide hedges. The sharp, dual-action cutting design minimizes vibrations and enhances cutting speed, allowing users to work through dense foliage quickly.

In terms of comfort, both hedge trimmers incorporate ergonomic handles that reduce operator fatigue during prolonged use. They are designed with a lightweight structure, making them easy to maneuver. Additionally, the adjustable rear handle ensures a secure grip, providing better control in various cutting positions.

The 326HS75 and 326HS99 also showcase advanced technology to enhance performance. The LowVib technology minimizes vibrations typically experienced during operation, aiding in user comfort and safety. Furthermore, the Air Injection feature in both models ensures a clean air supply to the engine, which leads to improved performance and extended intervals between air filter cleaning.

For users concerned about environmental impact, both models adhere to stringent emission regulations, ensuring efficient fuel consumption while reducing harmful emissions. The fuel tank design allows for a transparent view of fuel levels, preventing unexpected downtime.

In summary, the Husqvarna 326HS75 and 326HS99 hedge trimmers are exemplary tools in the landscaping segment. Their combination of powerful engines, efficient cutting systems, ergonomic design, and innovative technologies make them ideal for anyone looking to achieve professional results while maintaining comfort and reducing environmental impact. Whether for commercial or residential use, these hedge trimmers provide the reliability and performance necessary to shape and define any garden space.
Top Page Image Contents