Husqvarna 325LD, 325 L XT-Series, 323L, 322 L manual Technical data 325C

TECHNICAL DATA

Technical data	325C
Engine
Displacement, cu. in/cm3	1,50/24,5
Cylinder bore, inch/mm	1,34/34
Stroke length, inch/mm	1,06/27
Recommended max. speed, rpm	11 000 - 11 700
Idling speed, rpm	2 700
Speed of output shaft, rpm	11 700
Max. engine output, acc. to ISO 8893	0,9/ 9 000
kW/rpm	No
Catalytic converter muffler	No
Speed-regulated ignition system
Ignition system	Walbro MB 18
Manufacturer/type of ignition system	Champion RCJ 7Y
Spark plug	0,02/0,5
Electrode gap, inch/mm
Fuel lubrication system	Zama C1Q
Manufacturer/type of carburetor	1,06/0,5
Fuel tank capacity, US pint/litres
Weight
Weight without fuel, cutting tool and	9,3/4,2
guard, Lbs/kg
Sound levels (se note 1)
Equivalent sound pressure level at the user’s ear,
measured according to ANSI B175.3-1997,	91/98
dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured
according to ANSI B175.3-1997, m/s2	2,7/1,5
When idling, left/right handles, min:	3,5/1,7
When idling, left/right handles, max:	4,0/3,5
At max. speed, left/right handles, min:	6,0/9,0
At max. speed, left/right handles, max:

325CX-series

1,50/24,5

1,34/34

1,06/27

11 000 - 11 700

2700

11700 0,9/ 9 000 Yes

No

Walbro MB 20 Champion RCJ 7Y 0,02/0,5

Zama C1Q 1,06/0,5

9,3/4,2

92/97

2,5/2,1

3,2/2,2

4,4/4,2

6,2/8,4

Note 1: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Sound pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

22 – English