Husqvarna 326EX-Series manual Start, Fuel safety, Transport and storage

Page 9

SAFETY INSTRUCTIONS

Start

!WARNING!

When the engine starts with the choke lever in the choke or starter throttle position the cutting tool (blade or trimmer) starts to rotate immediately.

The complete clutch cover with shaft must be fitted be-

fore the machine is started, otherwise the clutch can become loose and cause personal injury.

Never start the machine in- doors. Bear in mind the dan- gers of inhaling the engine’s exhaust fumes.

Observe your surroundings

and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

• Place the machine on the ground, make sure the blade is free from branches and stones. Press the machine body against the ground using your left hand (NOTE! Do not use your foot). Grip the starter handle with your right hand and pull the starter cord.

Fuel safety

• Always use a fuel container with an anti-spill valve.

• Never fill the machine while the engine is running. Stop the engine and allow it to cool for a few minutes before refuelling.

• Provide good ventilation when filling or mixing fuel (petrol and 2-stroke oil).

Move the machine at least 3 m from the filling position before starting.

Never start the machine:

a)If you have spilt fuel on it.

Wipe up all spillage.

b) If you have spilt fuel on yourself or your clothes. Change your clothes.

c) If there is a fuel leak. Make regular checks for leakage from the fuel cap and the fuel supply pipes.

Transport and storage

Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or naked flames. For example, electric machines, electric motors, elec- trical switches/power switches, heaters or the like.

When storing or transporting fuel, approved containers in- tended for this purpose must be used.

When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out how to dispose of excess fuel.

The engine must be cooling off before storage or packaging.

!WARNING!

Exercise great care when handling fuel. Bear in mind the risk of fire, explosions and inhal- ing fumes.

English – 9

Image 9
Contents Operator’s manual Carb II, EPA Symbols Explanation of SymbolsContents Safety Instructions Machine’s safety equipmentPersonal protective equipment Muffler Vibration damping systemCutting equipment Locking nut Safety Instructions Safety Instructions Safety instructions regarding the surround- ings General safety instructionsSafety instructions before starting work Personal protectionFuel safety StartTransport and storage Safety instructions while working Basic safety precautionsGeneral working instructions Basic working techniquesSafety instructions after completing work What is what on the edger? What is WHAT?Assembly Assembling the bladeAssembling the angle gear Fuel Handling Fuel mixtureFuelling Control before starting Start and StopStart and stop StopCarburetor MaintenanceHigh speed needle H Correctly adjusted carburetor Final setting of the idling speed TMuffler with catalytic converter Cooling systemSpark plug Air filter Adjusting the edger‘s cutting depthLubricating the flexible drive axle Angle gearDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data Technical DataYour Warranty Rights Obligations Emission Control Warranty StatementEnglish 2005W28 114 03 39