Husqvarna 325RJ manual Fuel Handling, Fuelling

Page 15

FUEL HANDLING

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Always ensure there is adequate

!ventilation when handling fuel.

Gasoline

CAUTION! Always use high grade unleaded oil mixed gasoline (minimum 87 RON). Leaded fuel will destroy the catalytic converter and it will no longer serve its purpose.

•This engine is certified to operate on unleaded gasoline.

•The lowest recommended octane rating is 87. If you run the engine on lower octane rating than 87 so-called “knocking“ can occur. This leads to an increased engine temperature, which can result in a serious engine breakdown.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke oil, which is specially formulated for our two-stroke engines. Mixture 1:50 (2%).

•Never use two-stroke oil intended for water-cooled outboard engines, sometimes referred to as outboard oil.

•Never use oil intended for four-stroke engines.

Gasoline, litre

Two-stroke oil, litre

 

2% (1:50)

 

 

 

5

0,10

 

 

10

0,20

 

 

15

0,30

 

 

20

0,40

 

 

US gallon

US fl. oz.

 

 

1

2 1/2

 

 

2 1/2

6 1/2

 

 

5

12 7/8

 

 

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

•This engine is certified to operate on unleaded gasoline.

WARNING! The catalytic converter muffler

!gets very hot during and after use. This also applies during idling. Be aware of the fire hazard, especially when working near flammable substances and/or vapours.

Fuelling

WARNING! Taking the following precautions,

!will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling. Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently. Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

•Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

•Ensure that the fuel is well mixed by shaking the container before filling the tank.

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 323RJ 325RJX-SERIES KEY to Symbols SymbolsContents Safety Instructions Machine′s safety equipmentPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting equipmentSafety Instructions Safety Instructions Trimmer head General safety precautionsCutting equipment Sharpening grass cutters and grass bladesFuel safety StartingTransport and storage Basic working techniques Basic safety rulesGrass clearing using a grass blade General working instructionsTrimming Grass trimming using a trimmer head and plastic bladesWhat is what on the trimmer? What is WHAT?Assembly Fitting the J-handleFitting blades and trimmer heads Fitting other guards and cutting attachments Fuel Handling FuelFuelling Cold engine Starting and StoppingCheck before starting Starting and stoppingStopping Carburettor MaintenanceCorrectly adjusted carburettor MufflerHigh speed jet H Air filter Cleaning the air filterCooling system Spark plugMonthly maintenance Maintenance scheduleDaily maintenance Weekly maintenanceTechnical data Technical DataYour Warranty Rights and Obligations Federal Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Trimmy Hit Trimmy Hit Pro S35 ´z+H0=¶5V¨ T35 1140162-95 Federal Emission Control Warranty Statement

325RJ specifications

The Husqvarna 325RJ is a powerful and versatile trimmer designed for both professionals and avid gardeners alike. With its robust construction and innovative technologies, this model stands out in the competitive landscape of outdoor power equipment.

At the heart of the 325RJ is a reliable 28cc engine that delivers impressive performance. This lightweight engine not only ensures efficient fuel consumption but also provides high torque output, enabling users to complete their trimming tasks with ease. The engine is designed with Smart Start technology, which reduces the resistance in the starter cord by up to 40%. This makes it easier to start the trimmer, allowing users to get to work quickly without fussing over difficult starts.

One of the key features of the Husqvarna 325RJ is its balanced design, which enhances maneuverability and reduces user fatigue during extended use. The trimmer is equipped with an ergonomic handle that provides a comfortable grip, allowing for optimal control and precision while trimming. Additionally, the adjustable front handle allows users to customize their grip position according to their height or working style, ensuring comfort and efficiency.

This model is equipped with a 2-in-1 trimmer head that facilitates easy transitions between trimming and edging. The double line cutting system features a Tap 'n Go mechanism, which allows the user to extend the cutting line simply by tapping the trimmer head on the ground. This convenient feature ensures continuous operation without the need for lengthy line replacement.

Moreover, the Husqvarna 325RJ incorporates an anti-vibration system that minimizes vibrations transmitted to the user's hands, further enhancing comfort during extended trimming sessions. This feature is particularly beneficial for professional landscapers who rely on their equipment for prolonged periods.

In terms of build quality, the Husqvarna 325RJ is constructed from durable materials that withstand the rigors of outdoor use. This durability combined with a solid warranty gives users peace of mind, knowing that they are investing in a long-lasting piece of equipment.

Overall, the Husqvarna 325RJ is an excellent choice for anyone looking for a reliable, efficient, and user-friendly trimmer. With its robust engine, ergonomic features, and innovative technologies, this model supports a wide range of trimming tasks, making it an essential tool for maintaining a pristine landscape.
Top Page Image Contents