Husqvarna 325RJ Starting and Stopping, Check before starting, Starting and stopping, Cold engine

Page 16

STARTING AND STOPPING

Check before starting

For safety reasons follow these recommendations!

•Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

Starting and stopping

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Cold engine

Ignition: Set the stop switch to the start position.

Choke: Set the choke control in the choke position.

Air purge: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Warm engine

Ignition: Set the stop switch to the start position.

Choke: Set the throttle to the start position by moving the choke control to the choke position and then returning it to its original position.

16 – English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents 323RJ 325RJX-SERIES Symbols KEY to SymbolsContents Machine′s safety equipment Safety InstructionsPersonal protective equipment Vibration damping system MufflerCutting equipment Locking nutSafety Instructions Safety Instructions General safety precautions Cutting equipmentSharpening grass cutters and grass blades Trimmer headStarting Fuel safetyTransport and storage Basic safety rules Grass clearing using a grass bladeGeneral working instructions Basic working techniquesGrass trimming using a trimmer head and plastic blades TrimmingWhat is WHAT? What is what on the trimmer?Fitting the J-handle AssemblyFitting blades and trimmer heads Fitting other guards and cutting attachments Fuel Fuel HandlingFuelling Starting and Stopping Check before startingStarting and stopping Cold engineStopping Maintenance CarburettorMuffler Correctly adjusted carburettorHigh speed jet H Cleaning the air filter Cooling systemSpark plug Air filterMaintenance schedule Daily maintenanceWeekly maintenance Monthly maintenanceTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Tri Cut Trimmy H Trimmy Hit Trimmy Hit Pro S35 ´z+H0=¶5V¨ T35 1140162-95 Federal Emission Control Warranty Statement

325RJ specifications

The Husqvarna 325RJ is a powerful and versatile trimmer designed for both professionals and avid gardeners alike. With its robust construction and innovative technologies, this model stands out in the competitive landscape of outdoor power equipment.

At the heart of the 325RJ is a reliable 28cc engine that delivers impressive performance. This lightweight engine not only ensures efficient fuel consumption but also provides high torque output, enabling users to complete their trimming tasks with ease. The engine is designed with Smart Start technology, which reduces the resistance in the starter cord by up to 40%. This makes it easier to start the trimmer, allowing users to get to work quickly without fussing over difficult starts.

One of the key features of the Husqvarna 325RJ is its balanced design, which enhances maneuverability and reduces user fatigue during extended use. The trimmer is equipped with an ergonomic handle that provides a comfortable grip, allowing for optimal control and precision while trimming. Additionally, the adjustable front handle allows users to customize their grip position according to their height or working style, ensuring comfort and efficiency.

This model is equipped with a 2-in-1 trimmer head that facilitates easy transitions between trimming and edging. The double line cutting system features a Tap 'n Go mechanism, which allows the user to extend the cutting line simply by tapping the trimmer head on the ground. This convenient feature ensures continuous operation without the need for lengthy line replacement.

Moreover, the Husqvarna 325RJ incorporates an anti-vibration system that minimizes vibrations transmitted to the user's hands, further enhancing comfort during extended trimming sessions. This feature is particularly beneficial for professional landscapers who rely on their equipment for prolonged periods.

In terms of build quality, the Husqvarna 325RJ is constructed from durable materials that withstand the rigors of outdoor use. This durability combined with a solid warranty gives users peace of mind, knowing that they are investing in a long-lasting piece of equipment.

Overall, the Husqvarna 325RJ is an excellent choice for anyone looking for a reliable, efficient, and user-friendly trimmer. With its robust engine, ergonomic features, and innovative technologies, this model supports a wide range of trimming tasks, making it an essential tool for maintaining a pristine landscape.
Top Page Image Contents