Husqvarna 325CX, 325LDX, 323LD manual Machine′s safety equipment, Throttle lock, Stop switch

Page 7

GENERAL SAFETY PRECAUTIONS

FIRST AID KIT

Always have a first aid kit nearby.

Machines safety equipment

This section describes the machines safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine.

The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest service workshop.

IMPORTANT!

All servicing and repair work on the machine requires special training. This is especially true of the machines safety equipment. If your machine fails any of the checks described below you must contact your service agent. When you buy any of our products we guarantee the availability of professional repairs and service. If the retailer who sells your machine is not a servicing dealer, ask him for the address of your nearest service agent.

WARNING! Never use a machine with faulty

!safety equipment. The machine’s safety equipment must be checked and maintained as described in this section. If your machine fails any of these checks contact your service agent to get it repaired.

Throttle lock

The throttle lock is designed to prevent accidental operation of the throttle control. When you press the lock (A) (i.e. when you grasp the handle) it releases the throttle control (B).

When you release the handle the throttle control and the throttle lock both move back to their original positions. This movement is controlled by two independent return springs. This arrangement means that the throttle control is automatically locked at the idle setting.

Make sure the throttle control is locked at the idle setting when the throttle lock is released.

Press the throttle lock and make sure it returns to its original position when you release it.

Check that the throttle control and throttle lock move freely and that the return springs work properly.

See instructions under the heading Start. Start the machine and apply full throttle. Release the throttle and check that the cutting attachment stops and remains at a standstill. If the cutting attachment rotates with the throttle in the idle position then the carburettor idle setting must be checked. See instructions under the heading Maintenance.

Stop switch

Use the stop switch to switch off the engine.

Start the engine and make sure the engine stops when you move the stop switch to the stop setting.

English – 7

Image 7
Contents 323L 323LD 325CX 325LX 325LDX Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsStop switch Machine′s safety equipmentThrottle lock Vibration damping system Cutting attachment guardMuffler Locking nut Cutting equipmentTrimmer head Assembling and dismantling the two-piece shaft AssemblyAssembly Fitting the loop handleFitting other guards and cutting attachments Fitting the trimmer headGuard Fitting the trimmer guard and trimmer headFuel Handling Fuel safetyFuel Mixing FuellingStarting Starting and StoppingCheck before starting Starting and stoppingStopping Basic working techniques Basic safety rulesWorking Techniques General working instructionsTrimming Grass trimming with a trimmer headCarburettor MaintenanceHigh speed jet H Fine adjustment of the idle speed TCorrectly adjusted carburettor MufflerTwo-piece shaft Cleaning the air filterCooling system Spark plugBevel gear Oiling the air filterMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataTechnical data 325Cx 325Lx 325LDx Engine Attachments Art No Use with EC-declaration of conformity Applies to Europe onlySuper Auto Super Auto II Page S35 25 m T35 T25 T25C ´z+R-T¶63¨ Page 1150135-26 ´z+R-T¶63¨´z+R-T¶63¨2005-10-25