Fuel Handling, Fuel safety | Husqvarna 325HS75X-Series manual

FUEL HANDLING

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

!Bear in mind the risk of ﬁre, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are highly

!inﬂammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so-called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre	Two-stroke oil, litre

	2% (1:50)	3% (1:33)
	2% (1:50)	3% (1:33)

5	0,10	0,15

10	0,20	0,30

15	0,30	0,45

20	0,40	0,60

10 – English

325HS75X-Series specifications

The Husqvarna 325HS75X-Series is an innovative hedge trimmer designed for professionals and garden enthusiasts alike. This powerful tool excels in both performance and ergonomics, making it a top choice for those requiring a reliable solution for maintaining hedges and shrubs.

One of the standout features of the Husqvarna 325HS75X is its robust engine. Equipped with a 25cc, 2-stroke engine, this trimmer delivers high performance while ensuring fuel efficiency. With a power output of 1.1 kW, it provides enough strength to handle dense hedges and thick vegetation while minimizing operator fatigue during extended use.

The design of the 325HS75X emphasizes ease of handling. The lightweight construction, combined with an ergonomic handle, allows for easy maneuvering even in challenging positions. The adjustable rear handle further enhances comfort and control, making it ideal for vertical and horizontal trimming tasks.

In terms of cutting capability, the Husqvarna 325HS75X features dual reciprocating blades, measuring 75 cm (about 29.5 inches) in length. These sharp, precision-cut blades enable smooth and efficient cutting, allowing users to achieve clean and professional-looking results. The 32 mm tooth spacing is designed to handle a variety of branches, enhancing its versatility and making it suitable for different pruning tasks.

The trimmer also incorporates advanced technologies to improve its performance and ease of use. One such feature is the LowVib system, which significantly reduces vibrations during operation, enhancing user comfort and reducing fatigue. Additionally, the Easy Start feature makes starting the engine effortless, allowing users to focus more on the task at hand rather than wrestling with cumbersome starting procedures.

Safety is a crucial consideration in the design of the 325HS75X. The trimmer is equipped with durable guards and safety features that protect the operator from debris. Furthermore, its robust construction ensures longevity, making it a wise investment for anyone who requires a reliable hedge trimming solution.

In conclusion, the Husqvarna 325HS75X-Series is built for efficiency, comfort, and safety. Its powerful engine, precision blades, and ergonomic design make it an exceptional choice for tackling a variety of hedge trimming tasks, ultimately helping users achieve a well-maintained landscape with ease. Whether you are a professional landscaper or a homeowner looking to maintain your garden, the 325HS75X delivers the performance and reliability you need to get the job done effectively.