Husqvarna 325HS75X-Series Starting and Stopping, Check before starting, Starting and stopping

Page 12

STARTING AND STOPPING

Check before starting

•Inspect the working area. Remove any objects that could be thrown out.

•Check the cutting attachment. Never use blades that are dull, cracked or damaged.

•Check that the machine is in perfect working order. Check that all nuts and screws are tight.

•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.

•Check that the cutting attachment always stops when the engine is idling.

•Only use the machine for the purpose it was intended for.

•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover and

!gear housing must be fitted before the machine is started, otherwise the clutch may come loose and cause personal injury.

Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a firm surface. Remember that the blades may start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Cold engine

Primer bulb:

Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Choke:

Set the choke control in the choke position.

A

Warm engine

Primer bulb:

Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 325HS75X-series 325HS99X-series KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Stop switchThrottle lock Hand guard Vibration damping systemMuffler Gear housing Assembly of the catcher accessoryBlades Fuel safety Fuel HandlingFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping Cold engineStarting StoppingSafety instructions regarding the surroundings Safety instructions while workingWorking Techniques General working instructionsSafety instructions after completing work Basic working techniquesMaintenance CarburettorFine adjustment of the idle speed T Correctly adjusted carburettorMuffler High speed jet HCleaning the air filter Cooling systemSpark plug Air filterGear housing Cleaning and lubricationMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataEC-declaration of conformity Applies to Europe only Cispr 121997, EN774Page 1150089-26 ´z+R¶6¨ ´z+R¶6¨

325HS75X-Series specifications

The Husqvarna 325HS75X-Series is an innovative hedge trimmer designed for professionals and garden enthusiasts alike. This powerful tool excels in both performance and ergonomics, making it a top choice for those requiring a reliable solution for maintaining hedges and shrubs.

One of the standout features of the Husqvarna 325HS75X is its robust engine. Equipped with a 25cc, 2-stroke engine, this trimmer delivers high performance while ensuring fuel efficiency. With a power output of 1.1 kW, it provides enough strength to handle dense hedges and thick vegetation while minimizing operator fatigue during extended use.

The design of the 325HS75X emphasizes ease of handling. The lightweight construction, combined with an ergonomic handle, allows for easy maneuvering even in challenging positions. The adjustable rear handle further enhances comfort and control, making it ideal for vertical and horizontal trimming tasks.

In terms of cutting capability, the Husqvarna 325HS75X features dual reciprocating blades, measuring 75 cm (about 29.5 inches) in length. These sharp, precision-cut blades enable smooth and efficient cutting, allowing users to achieve clean and professional-looking results. The 32 mm tooth spacing is designed to handle a variety of branches, enhancing its versatility and making it suitable for different pruning tasks.

The trimmer also incorporates advanced technologies to improve its performance and ease of use. One such feature is the LowVib system, which significantly reduces vibrations during operation, enhancing user comfort and reducing fatigue. Additionally, the Easy Start feature makes starting the engine effortless, allowing users to focus more on the task at hand rather than wrestling with cumbersome starting procedures.

Safety is a crucial consideration in the design of the 325HS75X. The trimmer is equipped with durable guards and safety features that protect the operator from debris. Furthermore, its robust construction ensures longevity, making it a wise investment for anyone who requires a reliable hedge trimming solution.

In conclusion, the Husqvarna 325HS75X-Series is built for efficiency, comfort, and safety. Its powerful engine, precision blades, and ergonomic design make it an exceptional choice for tackling a variety of hedge trimming tasks, ultimately helping users achieve a well-maintained landscape with ease. Whether you are a professional landscaper or a homeowner looking to maintain your garden, the 325HS75X delivers the performance and reliability you need to get the job done effectively.
Top Page Image Contents