Fuel Handling

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/ switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

! Bear in mind the risk of ﬁre, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are

! highly inﬂammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so- called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two-stroke engine oil, which is specially formulated for our air-cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre	Two-stroke oil, litre
Petrol, litre
	2% (1:50)	3% (1:33)

5	0,10	0,15

10	0,20	0,30

15	0,30	0,45

20	0,40	0,60

10 – English

326HD60X-Series, 326HD75X-Series specifications

Husqvarna has long been recognized for its high-performance outdoor power equipment, and the 326HD60X-Series and 326HD75X-Series hedge trimmers are no exception. Designed for professional landscapers and homeowners alike, these models integrate advanced technology and ergonomic features to make trimming tasks efficient and comfortable.

The 326HD60X-Series boasts a powerful 24.5 cc engine that ensures robust performance, while the 326HD75X-Series is equipped with a slightly more powerful 25.4 cc engine. Both series are designed to handle a variety of hedge trimming tasks with minimal effort. One of the standout features of these models is their dual-sided blades, which are precision-ground for optimal cutting performance. This design not only allows for smoother cuts but also enhances the speed of operation.

One of the key technologies featured in both the 326HD60X and 326HD75X models is Smart Start. This technology ensures that the engine starts quickly with minimal effort, enabling users to get to work right away. Additionally, the models are engineered with anti-vibration technology, significantly reducing user fatigue during extended periods of trimming. The rubberized grip handle provides added comfort and control, making it easier to maneuver through tough jobs.

Safety is paramount with the 326HD series, and both models incorporate safety features like a blade stop function that halts blade movement almost instantaneously when released. This feature not only enhances safety but also improves productivity by minimizing downtime.

Another notable characteristic is the adjustable rear handle, which allows users to operate in various orientations, thereby improving accessibility and precision when trimming hedges of different shapes and sizes. This flexibility is ideal for tackling complex landscaping projects, helping to achieve a professionally manicured appearance.

Both the 326HD60X-Series and the 326HD75X-Series are built with durability in mind. The high-quality materials used in their construction ensure that they can withstand the rigors of regular use. Moreover, these models are designed for easy maintenance, which is essential for maintaining performance over time.

In summary, the Husqvarna 326HD60X-Series and 326HD75X-Series hedge trimmers offer a powerful, efficient, and user-friendly solution for both professional landscapers and home gardening enthusiasts. With their advanced features, safety technologies, and ergonomic designs, these hedge trimmers stand out as leading choices in the market for top-quality outdoor power tools.