Husqvarna 326HD60X-Series, 326HD75X-Series manual Blades, Blade guard, Gear housing

Page 9

GENERAL SAFETY PRECAUTIONS

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

! converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin.

Remember the risk of fire!

WARNING! The inside of the muffler

! contain chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

WARNING! Bear in mind that:

! The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

Blades

To ensure good cutting results it is important that the contact pressure between the blades is correct. The contact pressure is adjusted by turning the screws on the underside of the bar clockwise as far as they will go. Then turn the screws anticlockwise a 1/4 turn. Lock the screws using the locking nut on the top of the bar. Check that the screws are loose enough to allow the washers under the screw heads to slide sideways.

When the blades are correctly adjusted the play between the blades should be 0,2–0,4 mm, measured at the screws.

The edges of the blades are too hard to be filed. Dull blades should be sharpened using a grinder.

Replace the blades if they are bent or damaged.

Blade guard

The blade guard (A) is intended to protect against any part of the body coming into contact with the blades (B).

A

B

Check that the blade guard is not damaged or distorted. Replace the blade guard if it is bent or damaged.

Gear housing

The gear housing gets hot when the machine has been in use. To avoid burning yourself do not touch the gear housing.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 326HD60X-series 326HD75X-series Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what? What is WHAT?Personal protective equipment General Safety PrecautionsThrottle lockout Machine′s safety equipmentHand guard Stop switchVibration damping system MufflerGear housing BladesBlade guard Fuel safety Fuel HandlingFuel Mixing FuellingCheck before starting Starting and StoppingStarting and stopping Cold engineWarm engine StartingStopping Safety instructions while working Safety instructions regarding the surroundingsWorking Techniques General working instructionsBasic working techniques Safety instructions after completing workCarburettor MaintenanceFine adjustment of the idle speed T Low speed jet LHigh speed jet H Correctly adjusted carburettor MufflerCooling system Spark plug Cleaning the air filterAir filter Oiling the air filterCleaning and lubrication Gear housingMaintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataPage Page Page Page Page 1151110-26

326HD60X-Series, 326HD75X-Series specifications

Husqvarna has long been recognized for its high-performance outdoor power equipment, and the 326HD60X-Series and 326HD75X-Series hedge trimmers are no exception. Designed for professional landscapers and homeowners alike, these models integrate advanced technology and ergonomic features to make trimming tasks efficient and comfortable.

The 326HD60X-Series boasts a powerful 24.5 cc engine that ensures robust performance, while the 326HD75X-Series is equipped with a slightly more powerful 25.4 cc engine. Both series are designed to handle a variety of hedge trimming tasks with minimal effort. One of the standout features of these models is their dual-sided blades, which are precision-ground for optimal cutting performance. This design not only allows for smoother cuts but also enhances the speed of operation.

One of the key technologies featured in both the 326HD60X and 326HD75X models is Smart Start. This technology ensures that the engine starts quickly with minimal effort, enabling users to get to work right away. Additionally, the models are engineered with anti-vibration technology, significantly reducing user fatigue during extended periods of trimming. The rubberized grip handle provides added comfort and control, making it easier to maneuver through tough jobs.

Safety is paramount with the 326HD series, and both models incorporate safety features like a blade stop function that halts blade movement almost instantaneously when released. This feature not only enhances safety but also improves productivity by minimizing downtime.

Another notable characteristic is the adjustable rear handle, which allows users to operate in various orientations, thereby improving accessibility and precision when trimming hedges of different shapes and sizes. This flexibility is ideal for tackling complex landscaping projects, helping to achieve a professionally manicured appearance.

Both the 326HD60X-Series and the 326HD75X-Series are built with durability in mind. The high-quality materials used in their construction ensure that they can withstand the rigors of regular use. Moreover, these models are designed for easy maintenance, which is essential for maintaining performance over time.

In summary, the Husqvarna 326HD60X-Series and 326HD75X-Series hedge trimmers offer a powerful, efficient, and user-friendly solution for both professional landscapers and home gardening enthusiasts. With their advanced features, safety technologies, and ergonomic designs, these hedge trimmers stand out as leading choices in the market for top-quality outdoor power tools.
Top Page Image Contents