Husqvarna 500CT manual Battery, General

Page 3

General

1.Never allow children or people unfamiliar with these instructions to use the product. Local reg- ulations may restrict the age of the operator.

2.Only use the product in the manner and for the functions described in these instructions.

3.Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medi- cine.

4.The operator or user is responsible for accidents or hazards occurring to other people or their property.

5.This product has not been designed to provide protection from electric shock in the event of

contact with overhead electric lines.

Battery

Cordless Battery Powered Products require special care.

1.AVOID ACCIDENTAL STARTING

KEEP HANDS AND FINGERS AWAY FROM THE SWITCH LEVER WHILE CARRYING THE PROD- UCT.

2.Always charge the product indoors and store in a cool dry place - out of the reach of children.

3.Use only the charger provided with your unit. Use of any other charger could permanently damage the battery and the product.

4.Use the charger with standard domestic house- hold electrical outlets only.

5.Do not abuse the charger or charger cord.

6.Do not use the charger if the charger or cable is damaged.

7.Use the charger indoors only.

8.Do not use the charger outdoors.

9.Store and charge this unit in a cool, dry well ventilat- ed location and out of the reach of children.

10.Do not charge the battery or use the unit in an explosive or corrosive environment. Avoid areas where flammable liquids or gases are present to avoid creating a fire or explosion.

11.Do not attempt to repair the unit including the battery.

12.Do not insert any object into the motor area. Keep free of debris to avoid overheating.

13.Do not incinerate or mutilate the battery. Batteries contain hazardous chemicals. Dispose

of properly.

Preparation

1. Always wear suitable clothing, gloves, and stout

shoes. The use of safety glasses is recommend- ed. Do not wear loose clothing or jewellery which can be caught in moving parts.

2.Thoroughly inspect the area where the product is to be used and remove all wires and other for- eign objects.

3.Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.

4.Never attempt to use an incomplete product or

one with an unauthorised modification.

Use

1.Use the product only in daylight or good artificial light.

2.Avoid operating your product on a wet hedge, where feasible.

3.Know how to stop the product quickly in an emergency.

4.Remove Battery Pack before passing product to another person.

5.Avoid operating while people especially children are nearby.

6.Whilst using the product always be sure of a safe and secure operating position. Do not overeach.

7.Keep hands and feet away from the cutting means at all times and especially when switch- ing on the motor.

8.Do not use stepladders whilst operating the product.

9.Remove the Battery Pack :-

-before leaving the product unattended for any period;

-before clearing a blockage;

-before checking, cleaning or working on the appliance;

-if you hit an object. Do not use your product until you are sure that the entire product is in a safe operating condition;

-if the product starts to vibrate abnormally. Check immediately. Excessive vibration can cause injury.

-before passing to another person.

Maintenance and storage

1.Keep all nuts, bolts and screws secure to be sure the product is in safe working condition.

2.Replace worn or damaged parts for safety.

3.Be careful during adjustment of the product to prevent entrapment of the fingers between mov- ing blades and fixed parts of the machine.

4.After use the product should be stored using the blade cover provided

Battery

Battery Care

IMPORTANT

 

1.

If over a period of time the battery quickly runs

 

DISPOSE OF YOUR OLD BATTERIES SAFELY

 

down after a full 5-6 hour charging period, a

 

DO NOT CUT OPEN, BURN OR INCINERATE.

 

replacement battery is needed.

Winter Storage

 

2.

There will be some charge present in the battery

1.

Fully charge for 5-6 hours before winter storage.

 

but to ensure maximum running time, recharge

2.

Avoid extended storage without re-charge.

 

your product for 5-6 hours before use.

3.

Store in a cool dry place.

3.

To prevent permanent battery damage, never

For further information on Battery replacement

 

store in a discharged condition.

contact Husqvarna Outdoor Products Customer

4.

Contact your local approved service centre/deal-

Service direct:-

 

 

er/distributor for a replacement battery and for

Telephone:

0870 609 1901

 

safe disposal of your old battery.

Fax:

0870 609 1902

5.

Battery

 

 

 

18 Volt 1.3 Amp/Hour "High Power"

No maintenance required

Image 3
Contents Easicut Customer.services@husqvarna.co.ukSafety Carton ContentsGeneral BatteryCharging the Battery AssemblyStarting and Stopping How to UseFault Finding Hints Caring for your HedgetrimmerEnvironmental Information Guarantee & Guarantee Policy Service RecommendationsEC Declaration of Conformity

500CT specifications

The Husqvarna 500CT is an innovative model in the realm of outdoor power equipment, designed specifically for efficiency, versatility, and user comfort. Renowned for its robust features and advanced technologies, the 500CT has cemented itself as a reliable companion for homeowners and professionals alike.

One of the standout features of the Husqvarna 500CT is its powerful engine. Fitted with a durable and efficient engine, it delivers exceptional performance without compromising on fuel efficiency. The engine is designed to reduce exhaust emissions, aligning with modern environmental standards, while still providing the muscle needed for demanding tasks.

The 500CT boasts a unique cutting system that enhances its operational capabilities. It features a high-quality cutting blade system designed to handle a variety of terrains and foliage. This system allows for precise cuts and efficient debris management, making it suitable for tasks ranging from trimming grass to tackling tougher shrubs and small branches.

User comfort and ergonomics are prioritized in the design of the 500CT. The machine is equipped with an adjustable handlebar, allowing users to find their optimal grip and posture during operation. This feature significantly reduces fatigue during extended use, making it an ideal choice for both casual users and professionals who may spend long hours in the field.

Another key characteristic of the Husqvarna 500CT is its innovative Smart Start technology. This technology ensures that the engine starts effortlessly, minimizing the effort required by the user. Smart Start is a game-changer, especially for those who may struggle with starting traditional motors, providing a hassle-free experience.

In terms of maintenance, the 500CT is designed with user convenience in mind. The air filter is easy to access and replace, and the fuel system is engineered to minimize the need for frequent maintenance. This design not only prolongs the life of the machine but also keeps it running at peak performance without excessive downtime.

Lastly, the build quality of the Husqvarna 500CT cannot be overlooked. Constructed from high-quality materials with a focus on durability, this machine can withstand the rigors of outdoor work. Whether tackling thick underbrush or performing routine yard maintenance, the 500CT is engineered to thrive in demanding conditions, ensuring reliability and longevity.

Overall, the Husqvarna 500CT is a powerful, efficient, and ergonomic tool that epitomizes Husqvarna’s commitment to quality. Whether for professional landscaping or personal gardening, its features and technologies make it a formidable asset for any outdoor project.