Guarantee & Guarantee Policy

If any part is found to be defective due to faulty manu- facture within the guarantee period, Husqvarna Outdoor Products, through its Authorised Service Repairers will effect the repair or replacement to the customer free of charge providing:

(a)The fault is reported directly to the Authorised Repairer.

(b)Proof of purchase is provided.

(c)The fault is not caused by misuse, neglect or faulty adjustment by the user.

(d)The failure has not occurred through fair wear and tear.

(e)The machine has not been serviced or repaired, taken apart or tampered with by any person not authorised by Husqvarna Outdoor Products.

(f)The machine has not been used for hire.

(g)The machine is owned by the original purchaser.

(h)The machine has not been used outside of the country for which it was specified.

(i)The machine has not been used commercially.

*This guarantee is additional to, and in no way diminish- es the customers statutory rights.

Failures due to the following are not covered, therefore it is important that you read the instructions contained in

this Operator's Manual and understand how to operate and maintain your machine:

Failures not covered by guarantee

*Replacing worn or damaged blades

*Failures as a result of not reporting an initial fault.

*Failures as a result of sudden impact.

*Failures as a result of not using the product in accor- dance with the instructions and recommendations contained in this Operator's Manual.

*Machines used for hire are not covered by this guarantee.

*The following items listed are considered as wearing parts and their life is dependent on regular mainte- nance and are, therefore not normally subject to a valid warranty claim: Blades.

*Caution!

Husqvarna Outdoor Products does not accept liability under the warranty for defects caused in whole or part, directly or indirectly by the fitting of replacement parts or additional parts that are not either manufac- tured or approved by Husqvarna Outdoor Products, or by the machine having been modified in any way

Service Recommendations

1.We strongly recommend that your product is serviced at least every twelve months, more often in a profes- sional application.

2.Always use genuine Husqvarna Spare Parts.

3.Prepacked spares are available from most Husqvarna Outdoor Products stockists.

4.Your product is uniquely identified by a silver and black product rating label

5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.

6.Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete

machine including cable and any extension cables used.

A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.

All of the centres listed stock genuine Husqvarna Spare Parts. NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna Outdoor Products in any manner whatsoever.

EC Declaration of Conformity

I, the undersigned M. Bowden of Husqvarna

Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5

6UP. Certify that the product:-

Category........ Cordless Hedgetrimmer

Make.............. Husqvarna Outdoor

Products

Conforms to the specifications of Directive 2000/14/EC

I, the undersigned M. Bowden of Husqvarna

Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5

6UP Certify the maximum weighted sound pressure level recorded on a sample of the above product at the operator position under free field conditions was: -

I, the undersigned M. Bowden of Husqvarna

Outdoor Products, Aycliffe Industrial Park, NEWTON AYCLIFFE, Co. Durham. DL5

6UP Certify the maximum weighted root mean square value recorded on a sample of the above product at the operators hand position was: -

Identification of Series	See Product Rating Label
Conformity Assessment Procedure....ANNEX VI
Notified Body	Intertek, Cleeve Road, Leatherhead,
	Surrey. KT22 7SB England
Other Directives:-	98/37/EC, 89/336/EEC

&applicable standards:-. EN774, EN50366, EN55014-1,

EN61000-3-2, EN61000-3-3, EN55014-2, EN6100-6-3

Type	ECC500
Blade Length	50cm
Guaranteed sound power level	101 dB (A)
Measured Sound Power Level	93 dB (A)
Level	84 dB (A)
Value	0.58 m/s2
Weight	3.2 kg

Newton Aycliffe, 20/11/2006

M. Bowden,

Research & Development Director

Husqvarna Outdoor Products

Aycliffe Industrial Park

NEWTON AYCLIFFE

Co.Durham DL5 6UP

ENGLAND

Telephone - 0870 609 1901 Fax - 0870 609 1902

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.

5107689-01

500CT specifications

The Husqvarna 500CT is an innovative model in the realm of outdoor power equipment, designed specifically for efficiency, versatility, and user comfort. Renowned for its robust features and advanced technologies, the 500CT has cemented itself as a reliable companion for homeowners and professionals alike.

One of the standout features of the Husqvarna 500CT is its powerful engine. Fitted with a durable and efficient engine, it delivers exceptional performance without compromising on fuel efficiency. The engine is designed to reduce exhaust emissions, aligning with modern environmental standards, while still providing the muscle needed for demanding tasks.

The 500CT boasts a unique cutting system that enhances its operational capabilities. It features a high-quality cutting blade system designed to handle a variety of terrains and foliage. This system allows for precise cuts and efficient debris management, making it suitable for tasks ranging from trimming grass to tackling tougher shrubs and small branches.

User comfort and ergonomics are prioritized in the design of the 500CT. The machine is equipped with an adjustable handlebar, allowing users to find their optimal grip and posture during operation. This feature significantly reduces fatigue during extended use, making it an ideal choice for both casual users and professionals who may spend long hours in the field.

Another key characteristic of the Husqvarna 500CT is its innovative Smart Start technology. This technology ensures that the engine starts effortlessly, minimizing the effort required by the user. Smart Start is a game-changer, especially for those who may struggle with starting traditional motors, providing a hassle-free experience.

In terms of maintenance, the 500CT is designed with user convenience in mind. The air filter is easy to access and replace, and the fuel system is engineered to minimize the need for frequent maintenance. This design not only prolongs the life of the machine but also keeps it running at peak performance without excessive downtime.

Lastly, the build quality of the Husqvarna 500CT cannot be overlooked. Constructed from high-quality materials with a focus on durability, this machine can withstand the rigors of outdoor work. Whether tackling thick underbrush or performing routine yard maintenance, the 500CT is engineered to thrive in demanding conditions, ensuring reliability and longevity.

Overall, the Husqvarna 500CT is a powerful, efficient, and ergonomic tool that epitomizes Husqvarna’s commitment to quality. Whether for professional landscaping or personal gardening, its features and technologies make it a formidable asset for any outdoor project.