Husqvarna 232RJ, 240RJ, 227RJ manual Cutting attachment guard, Vibration damping system

Page 5

SAFETY INSTRUCTIONS

3.Cutting attachment guard

This guard is intended to prevent objects from being thrown towards the operator and to protect the operator from unintentionel contact with the cutting attachment.

!WARNING!

Under no circumstances may the cutting equipment be used without an approved guard fitted. See the chapter “Technical data”. If the wrong guard or a defective guard is fitted this can cause serious personal injury.

4.Vibration damping system

Your machine is equipped with a vibration damping system, which is designed to give as vibration-free and comfortable use as possible.

Use of incorrectly wound cord or incorrect cutting equipment increases the level of vibration.

The machine’s vibration damping system reduces the transfer of vibrations between the engine unit/ cutting equipment and the machine’s handle unit.

!WARNING!

Over exposure to vibrations can result in blood-vessel or nerve injury to persons suffering with blood circulation problems. Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples of such symptoms are “numbness“, lack of feeling, “tickling“, “pricking“, “pain“ lack of or a reduction in normal strength, changes in the colour of the skin or its surfaces. These symptoms normally appear in the fingers, hands or wrists.

English – 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 101 91 227RJ 232RJ 240RJMax 10000 rpm Symbol ExplanationSymbols Contents Machine‘s safety equipment Safety InstructionsStop switch Personal protective equipmentVibration damping system Cutting attachment guardLocking nut MufflerCutting equipment Maintenance Safety Instructions Trimmer head Cutting equipmentFiling the grass blade Fuel safety General safety instructionsStart Transport and storageBrush cutting using a grass blade Basic safety precautionsGeneral working instructions Basic working techniquesClearing Grass trimming using the trimmer head and plastic knifesTrimming SweepingWhat is what on the trimmer? What is WHAT?Assembly of the blade and trimmer head AssemblyDismantling takes place in the reverse order Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Carburetor MaintenanceHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Spark plug MufflerCooling system Angle gear Maintenance scheduleAir filter Technical data 227RJ 232RJ 240RJ Technical DataSkydd fö r skä rutrustning Art. nr TypType Cutting attachment guard Art NoYour Warranty Rights Obligations Emission Control Warranty StatementSuper Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro 2,4 mm 080-.095 12 cm ~ 3,5 m Trimmy SII 502 26 ´*30y¶5R¨ Page 2001W19
Top Page Image Contents