Husqvarna 240RBD manual Assembly, Assembling the J-handle and off- loading strap

Page 14

ASSEMBLY

Assembling the J-handle and off- loading strap

!WARNING

Only grass blades or trimmer heads/ plastic blades may be used when the J- handle is fitted. Clearing blades must never be used with the J-handle.

•Loosen the knob from the

handle bracket.

• Position the handle as shown. Fit the bracket components and tighten the handle lightly.

•Fit the off-loading strap

around the shaft as shown.

• Put on the harness and secure the off-loading on the right-hand side strap. Adjust the length so that the cutting equipment balances just above the ground.

• Finely adjust the J-handle

to give a comfortable

working stance. Tighten

Assembly of the blade and trimmer head

It is extremely important that the disc drive’s/support flange’s guide engages correctly in the cutting equipment’s centre hole when assembling the cutting equipment. Cutting equipment assembled incorrectly can result in serious and/or fatal personal injury.

!WARNING!

Do not attach any blade to the unit without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator and/or bystanders.

Under no circumstances may the cutting equipment be used without an approved guard fitted. See the chapter “Technical data”. If the wrong guard or a defective guard is fitted this can cause serious personal injury.

Assembling the blade guard and grass blade

the knob.

Transport position, J-handle

•The handlebars can easily

be turned to fit along the shaft for easy transportation and storage.

•Loosen the knob. Turn the J-handle clockwise.

•Thereafter fold the handlebars around the shaft. Tighten the handle.

•Attach the transport guard.

•The guard (A) is fitted using 4 screws (L) and the support plate (M) as set out in the diagram. NOTE! Use the recommended blade guard.

•Fit the drive disc (B) on the output axle.

•Turn the blade axle until one of the holes in the drive disc aligns with the hole in the gear housing.

•Insert the locking pin (C) in the hole so that the axle is locked.

•Place the blade (D), support cup (E) and support flange (F) on the output axle.

•Fit the nut (G). The tightening torque of the nut is 35-50 Nm (3,5 - 5 kpm). Use the socket spanner in the tool kit. Hold the handle of the spanner as close to the blade guard as possible. The nut is tightened when the spanner is turned against the direction of rotation (left-hand thread).

 

G

 

F

 

E

 

D

A

B

 

 

C

L

 

 

M

14 – English

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 240RBD Symbol Explanation SymbolsContents Personal protective equipment Safety InstructionsMachine‘s safety equipment Muffler Vibration damping systemQuick-release Cutting EquipmentMaintenance Safety Instructions Trimmer head Cutting equipmentFiling the grass blade General safety instructions General working instructions Basic safety precautionsAdjusting the harness and clearing saw Designations Brush cutting using a grass bladeBasic clearing techniques Grass trimming using the trimmer head and plastic blades ClearingWhat is WHAT? What is what on the grass trimmer and the brushcutter?Assembling the J-handle and off- loading strap AssemblyAssembly of the blade and trimmer head Assembling the blade guard and grass bladeTo dismantle follow the instructions in the reverse order Adjusting the harness and clearing saw Assembling and dismantling the two-part shaftFuelling Fuel HandlingFuel Start and stop Start and StopControl before starting Maintenance CarburettorHigh speed needle H Final setting of the idling speed TCorrectly adjusted carburettor Air filter MufflerCooling system Drive shaft Filing the grass blade Angle gearTwo-part shaft Spark plugDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenance Technical Data Technical data 240RBDEC declaration of conformity Only applies to Europe Super Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro Trimmy Hit Trimmy SII 502 26 Page ´+H,¶6i¨ Page ´+H,¶6i¨ 2002W05 114 00Gardening Tools Direct

240RBD specifications

The Husqvarna 240RBD is a robust and efficient brush cutter designed for homeowners and professionals alike, making it an ideal tool for maintaining gardens, yards, and larger green spaces. This lightweight machine is perfect for tackling tough grass, weeds, and dense brush, providing a versatile solution for various landscaping tasks.

One of the standout features of the 240RBD is its powerful and reliable engine. Equipped with Husqvarna’s X-Torq technology, the engine not only delivers superior performance but also enhances fuel efficiency, allowing operators to work longer without frequent refueling. This technology minimizes exhaust emissions, making it an eco-friendly option for users who prioritize sustainability.

The ergonomic design of the Husqvarna 240RBD makes it comfortable to operate for extended periods. The adjustable handle allows for optimal maneuverability, while the lightweight construction reduces operator fatigue. Its balance and design facilitate precise control, ensuring that you can navigate around obstacles with ease while achieving a clean cut.

Another significant feature is the brush cutter's dual harness system, which evenly distributes the weight of the tool across the body, providing enhanced comfort during use. This system is particularly beneficial when handling heavy workloads or working on uneven terrains. The soft-grip handles further add to user comfort, reducing vibration and allowing for a more stable grip.

The cutting equipment of the 240RBD is equally impressive, featuring a combination of a metal blade and a trimmer head. This versatility allows users to switch between cutting thick brush and trimming grass with minimal effort. The quick-release mechanism makes it easy to transition between these tools, ensuring that you can tackle various tasks efficiently.

Additionally, the Husqvarna 240RBD comes equipped with features that enhance usability. The easy-start system allows for quick ignition, reducing the hassle often associated with starting traditional gas-powered tools. The automatic gear lubrication helps in prolonging the life of the tool and maintaining optimal performance.

In summary, the Husqvarna 240RBD brush cutter represents a perfect blend of power, efficiency, and user-friendly design, making it a top choice for anyone seeking reliability in outdoor maintenance equipment. Whether you are a homeowner looking to maintain your garden or a professional landscaper, this brush cutter provides the performance and versatility required for various tasks.
Top Page Image Contents