Husqvarna 240RBD manual General safety instructions

Page 9

SAFETY INSTRUCTIONS

General safety instructions

IMPORTANT INFORMATION

•The machine is only designed for trimming grass and brush cutting.

•The only accessories to be used with the engine unit as a drive source are the cutting units we recommend in the chapter “Technical data“.

•Never use the machine if you are tired, if you have consumed alcohol, or if you are taking medicines that can affect your sight, your judgement or the control of your body.

•Use personal protective equipment. See the section “Personal protective equipment“.

•Never use a machine that has been modified so that it no longer corresponds with the original design.

•Never use a machine that is faulty. Follow the maintenance, control and service instructions in this Operator‘s Manual. Some maintenance and service actions should be carried out by trained and qualified specialists. See the chapter “Maintenance“.

•All covers and guards must be fitted before starting the machine. Check that the spark plug cap and HT lead are not damaged, otherwise you could get an electric shock.

•The machine operator shall ensure, while working, that no persons or animals come closer than 15 metres. When several operators are working in the same area the safety distance should be at least double tree length, however, at least 15 metres.

!WARNING!

Faulty cutting equipment or an incorrectly sharpened blade increases the risk of accidents.

Start

!WARNING!

When the engine is started with the choke in either the choke or start throttle positions the cutting equipment starts to rotate immediately.

•The complete clutch cover

with shaft must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

•Never start the machine indoors. Bear in mind the dangers of inhaling the engine‘s exhaust fumes.

•Observe your surroundings and make sure that there is no risk of people or animals coming into contact with the cutting equipment.

•Place the machine on the ground, ensure the cutting equipment runs free of twigs and stones. Push the machine body towards the ground using your left hand. (NOTE! Not with your foot). Grip the starter handle with your right hand and pull the starter cord.

Fuel safety

• Always use a fuel container with an anti-spill valve.

•Never fill the machine while the engine is running. Always stop the engine and let it cool for a

few minutes before refuelling.

•

Provide good ventilation

Min 3 m

 

when filling or mixing fuel

 

(10ft)

 

(petrol and 2-stroke oil).

•

Move the machine at least

 

 

3 m from the filling

 

 

position before starting.

 

•

Never start the machine:

 

a)If you have spilt fuel on it. Wipe up all spillage.

b)If you have spilt fuel on yourself or your clothes. Change your clothes.

c)If there is a fuel leak. Make regular checks for leakage from the fuel cap and the fuel supply pipes.

Transport and storage

•Store and transport the machine and fuel so that any leakage or fumes do not risk coming into contact with sparks or naked flames. For example, electric machines, electric motors, electrical switches/power switches, heaters or the like.

•When storing and transporting fuel approved containers intended for this purpose must be used.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to find out how to dispose of excess fuel.

•Always keep the transport guard attached when transporting and storing the machine.

!WARNING!

Exercise great care when handling fuel. Bear in mind the risk of fire, explosions and inhaling fumes.

English – 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents 240RBD Symbols Symbol ExplanationContents Safety Instructions Machine‘s safety equipmentPersonal protective equipment Quick-release Vibration damping systemMuffler Cutting EquipmentMaintenance Safety Instructions Cutting equipment Filing the grass bladeTrimmer head General safety instructions Basic safety precautions Adjusting the harness and clearing sawGeneral working instructions Brush cutting using a grass blade Basic clearing techniquesDesignations Clearing Grass trimming using the trimmer head and plastic bladesWhat is what on the grass trimmer and the brushcutter? What is WHAT?Assembly of the blade and trimmer head AssemblyAssembling the J-handle and off- loading strap Assembling the blade guard and grass bladeTo dismantle follow the instructions in the reverse order Assembling and dismantling the two-part shaft Adjusting the harness and clearing sawFuel Handling FuelFuelling Start and Stop Control before startingStart and stop Carburettor MaintenanceFinal setting of the idling speed T Correctly adjusted carburettorHigh speed needle H Muffler Cooling systemAir filter Drive shaft Two-part shaft Angle gearFiling the grass blade Spark plugMaintenance schedule Weekly maintenanceDaily maintenance Monthly maintenance Technical data 240RBD Technical DataEC declaration of conformity Only applies to Europe Super Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro Trimmy Hit Trimmy SII 502 26 Page ´+H,¶6i¨ Page 114 00 ´+H,¶6i¨ 2002W05Gardening Tools Direct

240RBD specifications

The Husqvarna 240RBD is a robust and efficient brush cutter designed for homeowners and professionals alike, making it an ideal tool for maintaining gardens, yards, and larger green spaces. This lightweight machine is perfect for tackling tough grass, weeds, and dense brush, providing a versatile solution for various landscaping tasks.

One of the standout features of the 240RBD is its powerful and reliable engine. Equipped with Husqvarna’s X-Torq technology, the engine not only delivers superior performance but also enhances fuel efficiency, allowing operators to work longer without frequent refueling. This technology minimizes exhaust emissions, making it an eco-friendly option for users who prioritize sustainability.

The ergonomic design of the Husqvarna 240RBD makes it comfortable to operate for extended periods. The adjustable handle allows for optimal maneuverability, while the lightweight construction reduces operator fatigue. Its balance and design facilitate precise control, ensuring that you can navigate around obstacles with ease while achieving a clean cut.

Another significant feature is the brush cutter's dual harness system, which evenly distributes the weight of the tool across the body, providing enhanced comfort during use. This system is particularly beneficial when handling heavy workloads or working on uneven terrains. The soft-grip handles further add to user comfort, reducing vibration and allowing for a more stable grip.

The cutting equipment of the 240RBD is equally impressive, featuring a combination of a metal blade and a trimmer head. This versatility allows users to switch between cutting thick brush and trimming grass with minimal effort. The quick-release mechanism makes it easy to transition between these tools, ensuring that you can tackle various tasks efficiently.

Additionally, the Husqvarna 240RBD comes equipped with features that enhance usability. The easy-start system allows for quick ignition, reducing the hassle often associated with starting traditional gas-powered tools. The automatic gear lubrication helps in prolonging the life of the tool and maintaining optimal performance.

In summary, the Husqvarna 240RBD brush cutter represents a perfect blend of power, efficiency, and user-friendly design, making it a top choice for anyone seeking reliability in outdoor maintenance equipment. Whether you are a homeowner looking to maintain your garden or a professional landscaper, this brush cutter provides the performance and versatility required for various tasks.
Top Page Image Contents