Husqvarna 128RJ manual Assembly, Fitting the loop handle, Fitting the harness

Page 10

ASSEMBLY

NOTE: Make sure unit is assembled cor- rectly as shown in this manual.

Fitting the loop handle

SPosition the handle on the shaft. Note that the handle must be mounted between the two arrows on the shaft.

SFit the screw, securing plate and wing nut as shown in the diagram.

SMake a final adjustment of the J--handle to a comfortable working position. Tighten the wing nut.

WARNING: Only grass blades/ grass cutters or trimmer heads/plastic blades may be used when the J-handle is fitted. Saw blades must never be used with the J-handle.

Fitting the harness

WARNING: When using a brushcutter, it must always be hooked securely to the harness. Otherwise, you will be unable to control the brushcutter safely. This can result in injury to yourself or others.

Proper harness and handlebar adjust- ments must be made with the engine com- pletely stopped before using unit.

Fitting the harness clamp

SPlace the upper harness clamp over the shaft and position the lower harness clamp under the shaft. Align the upper and lower clamp screw holes. Clamp must be fitted above the arrow on the shaft (see illustration).

SInsert two screws into the screw holes. S Secure harness clamp by tightening

screws with a hex wrench.

Adjusting the harness

S Insert your right arm and head through the harness and allow it to rest on your left shoulder. Make sure the harness hook is to the right side of your waist. NOTE: A one-half twist is built in the har- ness to allow the harness to rest flat on the

shoulder.

S Adjust the harness, allowing the hook to be about 15 cm below the waist.

S Fasten the harness to the harness clamp on the shaft and lift the unit to the operat- ing position.

S Put on the harness. Now make a final adjustment so that the unit is in a com- fortable working position when it hangs from the harness.

NOTE: It may be necessary to relocate the harness clamp on the shaft for proper balancing of unit.

Correct height

Adjust the harness so that the cutting at- tachment is parallel to the ground.

545196786 Rev. 2 4/30/09

English--- 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents EN 2-27 FR 28-53 ES Symbol Explanation SymbolsContents What is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine’s safety equipment Throttle lock-outCutting attachment guard Stop switchMuffler Cutting equipment Cutting equipmentLocking nut General rulesSharpening grass cutters and grass blades Trimmer headFitting the loop handle AssemblyFitting the harness Fitting a blade guard, grass blade and grass cutter Fitting blades and trimmer headsCorrect balance Fitting the trimmer guard and trimmer head Fuel Handling Fuel safetyFuel Fuelling MixingStarting and stopping Starting and StoppingCheck before starting Cold engineWarm engine StoppingGeneral working instructions Basic safety rulesWorking Techniques Basic working techniquesTrimming Grass clearing using a grass bladeGrass trimming with a trimmer head ClearingCutting SweepingCarburetor MaintenanceUnit/Maintenance Safety MufflerAir filter Cleaning the air filterSpark plug Bevel gearSharpening grass cutters and grass blades Maintenance schedule Maintenance Daily Weekly Monthly Maintenance MaintenanceTechnical Data Technical dataDeclaration of Conformity EC Declaration of Conformity Only applies to EuropeTrimmer Head Line Loading Instructions Plastic Blades Tri Cut 545196786 Rev 30/09

128RJ specifications

The Husqvarna 128RJ is a versatile and user-friendly string trimmer designed for homeowners and garden enthusiasts seeking a reliable tool for maintaining their lawns and gardens. Known for its lightweight design and exceptional performance, the 128RJ stands out as an excellent choice for those looking to tackle various landscaping tasks with ease.

One of the main features of the Husqvarna 128RJ is its powerful 28cc engine, delivering efficient performance while remaining fuel-efficient. The engine is engineered to provide consistent power, making it suitable for trimming grass, weeds, and even tackling heavier overgrowth. The trimmer's 2-stroke gas engine also reduces emissions, making it environmentally friendly, a crucial feature for today's eco-conscious consumers.

The ergonomic design of the 128RJ ensures comfortable operation during extended use. It comes equipped with a lightweight frame that minimizes fatigue while operating, allowing users to work longer without discomfort. The adjustable handle further enhances usability, enabling users to find their preferred working position, reducing strain on the back and arms.

Another notable characteristic of the Husqvarna 128RJ is its unique "Smart Start" technology, designed to simplify starting the engine. This innovation minimizes resistance in the starter cord, making it easier for anyone to get the trimmer running smoothly with minimal effort.

Additionally, the 128RJ features a semi-automatic line feed system, allowing for effortless and efficient line advancement. The system ensures that users can focus on their trimming tasks without the hassle of manual adjustments, resulting in a more streamlined experience.

The Husqvarna 128RJ also boasts a detachable shaft, facilitating easy transport and storage. This feature is particularly beneficial for homeowners with limited storage space or those who need to carry the trimmer to various locations around their property.

In conclusion, the Husqvarna 128RJ string trimmer combines power, comfort, and innovative technology, making it an excellent addition to any gardening toolkit. Its robust performance, lightweight design, and user-friendly features ensure that homeowners can achieve professional-looking results in their yard maintenance without the stress normally associated with such tasks. Whether you are tackling thick weeds or maintaining a manicured lawn, the 128RJ proves to be a reliable companion for all your trimming needs.
Top Page Image Contents