Husqvarna 128RJ manual Carburetor, Unit/Maintenance Safety, Muffler

Page 20

MAINTENANCE

The owner is responsible for the perfor- mance of all required maintenance as defined in the operator’s manual.

Carburetor

Your Husqvarna product has been designed and manufactured to specifications that re- duce harmful emissions. After the engine has used 8--10 tanks of fuel, the engine will be run--in. To ensure that it continues to run at peak performance and to minimize harm- ful exhaust emissions after the run--in peri- od, ask your servicing dealer to adjust your carburetor.

WARNING: The complete clutch, clutch cover, and shaft must be fitted before the machine is started, otherwise parts could come loose and cause personal injury.

Function

SThe carburetor governs the engine’s speed via the throttle control. Air and fuel

are mixed in the carburetor.

SThe T--screw regulates the throttle setting at idle speed. If the T--screw is turned clockwise this gives a higher idle speed; turning it counterclockwise gives a lower idle speed.

Basic setting

SThe basic carburetor settings are ad- justed during testing at the factory. Fine adjustment should be carried out by a skilled technician.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned counterclockwise until the cutting attachment stops.

Rec. idle speed:

See “Technical data” section.

Recommended max. speed:

See “Technical data” section.

Fine adjustment of the idle speed-T

Adjust the idle speed using the idle adjust- ment screw--T if it is necessary to readjust. First, turn the idle adjustment screw--T clockwise until the cutting attachment starts to rotate. Then, turn the screw counter- clockwise until the cutting attachment stops. The idle speed is correctly adjusted when the engine will run smoothly in every posi- tion. The idle speed should also be well below the speed at which the cutting attach- ment starts to rotate.

545196786 Rev. 2 4/30/09

Idle Speed

Screw--T

WARNING: If the idle speed can- not be adjusted so that the cutting attachment stops, contact your ser- vicing dealer. Do not use the ma- chine until it has been correctly ad- justed or repaired.

Unit/Maintenance Safety

Disconnect the spark plug before perform- ing maintenance, except carburetor adjust- ments.

Muffler

CAUTION! Muffler is fitted with a catalytic convertic designed to reduce harmful ex- haust gases.

The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. The exhaust gases are hot and can contain sparks, which may cause fire if directed against dry and com- bustible material.

Mufflers are equipped with a special spark arrestor mesh. You should clean the mesh at least once a month. This is best done with a wire brush. If the mesh is damaged it should be replaced. If the mesh is fre- quently blocked, this can be a sign that the performance of the catalytic converter is impaired. Contact your dealer to inspect the muffler. A blocked mesh will cause the machine to overheat and result in damage to the cylinder and piston.

Muffler bolts

Spark arrestor mesh

CAUTION! Never use a machine that has a faulty or loose muffler. Ensure the muffler bolts are tight.

English--- 20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents EN 2-27 FR 28-53 ES Symbol Explanation SymbolsContents What is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine’s safety equipment Throttle lock-outMuffler Stop switchCutting attachment guard Cutting equipment Locking nutCutting equipment General rulesSharpening grass cutters and grass blades Trimmer headFitting the harness AssemblyFitting the loop handle Correct balance Fitting blades and trimmer headsFitting a blade guard, grass blade and grass cutter Fitting the trimmer guard and trimmer head Fuel Fuel safetyFuel Handling Fuelling MixingStarting and Stopping Check before startingStarting and stopping Cold engineWarm engine StoppingBasic safety rules Working TechniquesGeneral working instructions Basic working techniquesGrass clearing using a grass blade Grass trimming with a trimmer headTrimming ClearingCutting SweepingMaintenance Unit/Maintenance SafetyCarburetor MufflerCleaning the air filter Spark plugAir filter Bevel gearSharpening grass cutters and grass blades Maintenance schedule Maintenance Daily Weekly Monthly Maintenance MaintenanceTechnical Data Technical dataDeclaration of Conformity EC Declaration of Conformity Only applies to EuropeTrimmer Head Line Loading Instructions Plastic Blades Tri Cut 545196786 Rev 30/09

128RJ specifications

The Husqvarna 128RJ is a versatile and user-friendly string trimmer designed for homeowners and garden enthusiasts seeking a reliable tool for maintaining their lawns and gardens. Known for its lightweight design and exceptional performance, the 128RJ stands out as an excellent choice for those looking to tackle various landscaping tasks with ease.

One of the main features of the Husqvarna 128RJ is its powerful 28cc engine, delivering efficient performance while remaining fuel-efficient. The engine is engineered to provide consistent power, making it suitable for trimming grass, weeds, and even tackling heavier overgrowth. The trimmer's 2-stroke gas engine also reduces emissions, making it environmentally friendly, a crucial feature for today's eco-conscious consumers.

The ergonomic design of the 128RJ ensures comfortable operation during extended use. It comes equipped with a lightweight frame that minimizes fatigue while operating, allowing users to work longer without discomfort. The adjustable handle further enhances usability, enabling users to find their preferred working position, reducing strain on the back and arms.

Another notable characteristic of the Husqvarna 128RJ is its unique "Smart Start" technology, designed to simplify starting the engine. This innovation minimizes resistance in the starter cord, making it easier for anyone to get the trimmer running smoothly with minimal effort.

Additionally, the 128RJ features a semi-automatic line feed system, allowing for effortless and efficient line advancement. The system ensures that users can focus on their trimming tasks without the hassle of manual adjustments, resulting in a more streamlined experience.

The Husqvarna 128RJ also boasts a detachable shaft, facilitating easy transport and storage. This feature is particularly beneficial for homeowners with limited storage space or those who need to carry the trimmer to various locations around their property.

In conclusion, the Husqvarna 128RJ string trimmer combines power, comfort, and innovative technology, making it an excellent addition to any gardening toolkit. Its robust performance, lightweight design, and user-friendly features ensure that homeowners can achieve professional-looking results in their yard maintenance without the stress normally associated with such tasks. Whether you are tackling thick weeds or maintaining a manicured lawn, the 128RJ proves to be a reliable companion for all your trimming needs.
Top Page Image Contents