English
Storage
1.Lubricate the blade bars to prevent rust with special grease, part no. 531 00
2.Empty the fuel tank and put the cap back on.
3.Remove the spark plug, pour a small amount of oil into the cylinder.
4.Rotate the crankshaft several times using the starting rope in order to distribute the oil. Put the spark plug back in.
5.Wrap the engine with a plastic sheet.
6.Store the trimmer indoors in a dry place, dust free place, out of the reach of children, preferably not in direct contact with the floor and away from heat sources.
Disposal
When disposing your machine, fuel or oil for the machine, be sure to allow your local regulations.
Troubleshooting guide
Case 1. Starting failure
CHECK | PROBABLE CAUSES | ACTION |
fuel tank | ➞ incorrect fuel | ➞ drain it and with correct fuel |
fuel filter | ➞ fuel filter is clogged | ➞ clean |
carburetor adjustment screw | ➞ out of normal range | ➞ adjust to normal range |
sparking (no spark) | ➞ spark plug is fouled/wet | ➞ clean/dry |
| ➞ plug gap is incorrect | ➞ correct (GAP: 0.6 – 0.7 mm) |
spark plug | ➞ disconnected | ➞ retighten |
|
| |
Case 2. Engine starts but does not keep running/Hard |
| |
|
|
|
CHECK | PROBABLE CAUSES | ACTION |
fuel tank | ➞ incorrect fuel or staled fuel | ➞ drain it and with correct fuel |
carburetor adjustment screw | ➞ out of normal range | ➞ adjust to normal range |
muffler,cylinder (exhaust port) | ➞ carbon is | ➞ wipe away |
air cleaner | ➞ clogged with dust | ➞ wash |
cylinder fin, fan cover | ➞ clogged with dust | ➞ clean |
|
|
|
When your unit seems to need further service, please consult with our service shop in your area.
18