Husqvarna 240R, 240F, 265RX, 252RX, 250R General Safety Precautions, Personal protective equipment

Page 10

GENERAL SAFETY PRECAUTIONS

Important

IMPORTANT!

The machine is only designed for trimming grass, grass clearing and/or forestry clearing.

The only accessories you can operate with this engine unit are the cutting attachments we recommend in the chapter on Technical data.

Never use the machine if you are tired, if you have drunk alcohol, or if you are taking medication that could affect your vision, your judgement or your co-ordination.

Wear personal protective equipment. See instructions under the heading Personal protective equipment.

Never use a machine that has been modified in any way from its original specification.

Never use a machine that is faulty. Carry out the checks, maintenance and service instructions described in this manual. Some maintenance and service measures must be carried out by trained and qualified specialists. See instructions under the heading Maintenance.

All covers and guards must be fitted before starting. Make sure the spark plug cap and HT lead are not damaged. Otherwise you could get an electric shock.

The machine operator must ensure that no people or animals come closer than 15 metres while working. When several operators are working in the same area the safety distance should be at least twice the tree height and no less than 15 metres.

Personal protective equipment

IMPORTANT!

A clearing saw, brushcutter or trimmer can be dangerous if used incorrectly or carelessly, and can cause serious or fatal injury to the operator or others. It is extremely important that you read and understand the contents of this operator’s manual.

You must use approved personal protective equipment whenever you use the machine. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your dealer for help in choosing the right equipment.

WARNING! Listen out for warning signals or

!shouts when you are wearing hearing protection. Always remove your hearing protection as soon as the engine stops.

HELMET

A helmet should be worn if the trees being cleared are taller than 2 m.

HEARING PROTECTION

Wear hearing protection that provides adequate noise reduction.

EYE PROTECTION

Always wear approved eye protection. If you use a visor then you must also wear approved protective goggles. Approved protective goggles must comply with standard ANSI Z87.1 in the USA or EN 166 in EU countries. Visors must comply with standard EN 1731.

GLOVES

Gloves should be worn when necessary, e.g., when fitting cutting attachments.

BOOTS

Wear sturdy, non-slip boots.

CLOTHING

Wear clothes made of a strong fabric and avoid loose clothing that can catch on twigs and branches. Always wear heavy, long pants. Do not wear jewellery, shorts sandals or go barefoot. Secure hair so it is above shoulder level.

FIRST AID KIT

Always have a first aid kit nearby.

Machine′s safety equipment

This section describes the machine′s safety equipment, its purpose, and how checks and maintenance should be carried out to ensure that it operates correctly. See the ”What is what?” section to locate where this equipment is positioned on your machine.

10 – English

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 240F 240R 250R 252RX 265RX KEY to Symbols SymbolsContents Introduction Dear CustomerWhat is WHAT? What is what on the clearing saw? 240RWhat is what on the clearing saw? 240F What is what on the clearing saw? 250R What is what on the clearing saw? 252RX What is what on the clearing saw? 265RX Machine′s safety equipment General Safety PrecautionsPersonal protective equipment Throttle lock Stop switchCutting attachment guard Quick release Vibration damping systemMuffler Locking nut Cutting equipmentCutting equipment Sharpening grass cutters and grass blades Sharpening the saw bladeTrimmer head Fitting the handlebar AssemblyAssembling the handlebar and throttle Transport position, handlebarAssembling the cutting equipment Adjusting the throttle triggerFitting a blade guard, grass blade and grass cutter Blade guard a is fitted using 4 screws L as shown Fitting the blade guard and saw bladeStandard harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Triobalance harnessAdjusting the harness Correct balanceFuel Handling Fuel safetyFuel Fuelling MixingStarting and Stopping Check before startingWarm engine Starting and stoppingCold engine StoppingGeneral working instructions Basic safety rulesWorking Techniques ABC of clearingForestry clearing using a saw blade Working methodsGrass clearing using a grass blade Brush cutting with a saw bladeGrass trimming with a trimmer head TrimmingCarburettor MaintenanceBasic setting MufflerCooling system Cleaning the air filterAir filter Spark plug Bevel gearOiling the air filter Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataTechnical data 250R 252RX 265RX Engine Technical Data Applies to Europe only EC-declaration of conformityCispr 121997, EN608 Page Page 095-.130 Clic 35-50 NMPage 3,3 mm 106-.130 Mm 9,0 m Mm 7,5 m Mm 6,0 m 15 cm ´z+H96¶6a¨ Page 1140252-26 ´z+H96¶6a¨ ´z+H96¶6a¨ Gardening Tools Direct

250R, 252RX, 265RX, 240F, 240R specifications

Husqvarna, a leader in outdoor power equipment, offers a range of high-performance brushcutters designed for both professionals and avid gardeners. Among the standout models in their lineup are the Husqvarna 265RX, 250R, 252RX, 240R, and 240F. Each model boasts unique features and technologies that cater to various needs, ensuring efficient performance for different landscaping and gardening tasks.

The Husqvarna 265RX is known for its robust power and durability, equipped with a high-performance 25.4 cc engine. This model features a unique X-Torq engine technology, which significantly reduces fuel consumption and emissions while delivering a high torque output. Its ergonomic design includes an adjustable handlebar and a lightweight build, ensuring user comfort even during extended use. The 265RX also comes with a Tap ‘n Go trimmer head, allowing for easy line advancement, saving time in the field.

Similarly, the Husqvarna 250R offers a balance of power and maneuverability, with a 25 cc engine and a well-balanced design. This model features an efficient air injection system that increases engine life by filtering out larger debris before it reaches the air filter. The 250R also incorporates a Smart Start system designed to make starting the machine effortless, reducing cord resistance during the start-up process.

The 252RX model enhances user experience with its lightweight frame and powerful engine. With a displacement of 25.4 cc, it provides high performance while minimizing fatigue during longer working hours. The 252RX is also equipped with an ergonomic handle, which can be adjusted to conform to the user’s height, promoting comfort and control.

The Husqvarna 240R is specially designed for residential users, featuring a 40 cc engine that strikes a balance between power efficiency and ease of use. Its low weight makes it ideal for routine maintenance tasks around the yard, while the automatic choke system ensures hassle-free starting, even in colder conditions.

Lastly, the Husqvarna 240F is an excellent choice for users who require versatility. This model is equipped with a robust 40 cc engine and a versatile attachment system that allows users to switch between different tools, enhancing its functionality. The 240F also includes a dual line head for improved cutting efficiency.

Together, these Husqvarna models showcase the brand’s commitment to innovation, performance, and user comfort, making them ideal choices for various applications in lawn care and landscaping. Whether for professional use or home gardening, Husqvarna's offerings remain at the forefront of outdoor power equipment technology.
Top Page Image Contents