Husqvarna 252RX, 240R, 240F, 265RX, 250R manual Starting and Stopping, Check before starting

Page 23

STARTING AND STOPPING

Check before starting

WARNING! When the engine is started with ! the choke in either the choke or start throttle

positions the cutting attachment will start to rotate immediately.

• Never start the machine indoors. Exhaust fumes can be dangerous if inhaled.

• Observe your surroundings and make sure that there is no

risk of people or animals coming into contact with the cutting equipment.

• Place the machine on the ground, ensure the cutting attachment is clear of twigs and stones. Hold the body of the machine on the ground using your left hand (CAUTION! Not with your foot). Then grip the starter handle with your right hand and pull the starter cord.

For safety reasons follow these recommendations!

•Check the blade to ensure that no cracks have formed at the bottom of the teeth or by the centre hole. The most common reason why cracks are formed is that sharp corners have been formed at the bottom of the teeth while sharpening or that the blade has been used with dull teeth. Discard a blade if cracks are found.

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut should be 35-50 Nm.

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the trimmer head and trimmer guard are not damaged or cracked. Replace the trimmer head or trimmer guard if they have been exposed to impact or are cracked.

•Never use the machine without a guard nor with a defective guard.

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Always move the machine away from the refuelling area before starting. Place the machine on a flat surface. Ensure the cutting attachment cannot come into contact with any object.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

English – 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 240F 240R 250R 252RX 265RX Symbols KEY to SymbolsContents Dear Customer IntroductionWhat is what on the clearing saw? 240R What is WHAT?What is what on the clearing saw? 240F What is what on the clearing saw? 250R What is what on the clearing saw? 252RX What is what on the clearing saw? 265RX Personal protective equipment General Safety PrecautionsMachine′s safety equipment Cutting attachment guard Stop switchThrottle lock Muffler Vibration damping systemQuick release Cutting equipment Cutting equipmentLocking nut Sharpening the saw blade Sharpening grass cutters and grass bladesTrimmer head Transport position, handlebar AssemblyAssembling the handlebar and throttle Fitting the handlebarFitting a blade guard, grass blade and grass cutter Adjusting the throttle triggerAssembling the cutting equipment Fitting the blade guard and saw blade Blade guard a is fitted using 4 screws L as shownTriobalance harness Adjusting the harness and clearing sawFitting other guards and cutting attachments Standard harnessCorrect balance Adjusting the harnessFuel Fuel safetyFuel Handling Mixing FuellingCheck before starting Starting and StoppingStopping Starting and stoppingCold engine Warm engineABC of clearing Basic safety rulesWorking Techniques General working instructionsWorking methods Forestry clearing using a saw bladeBrush cutting with a saw blade Grass clearing using a grass bladeTrimming Grass trimming with a trimmer headMuffler MaintenanceBasic setting CarburettorAir filter Cleaning the air filterCooling system Oiling the air filter Bevel gearSpark plug Maintenance Daily Weekly Monthly Maintenance scheduleTechnical data Technical DataTechnical data 250R 252RX 265RX Engine Technical Data Cispr 121997, EN608 EC-declaration of conformityApplies to Europe only Page Page Clic 35-50 NM 095-.130Page 3,3 mm 106-.130 Mm 9,0 m Mm 7,5 m Mm 6,0 m 15 cm ´z+H96¶6a¨ Page 1140252-26 ´z+H96¶6a¨ ´z+H96¶6a¨ Gardening Tools Direct

250R, 252RX, 265RX, 240F, 240R specifications

Husqvarna, a leader in outdoor power equipment, offers a range of high-performance brushcutters designed for both professionals and avid gardeners. Among the standout models in their lineup are the Husqvarna 265RX, 250R, 252RX, 240R, and 240F. Each model boasts unique features and technologies that cater to various needs, ensuring efficient performance for different landscaping and gardening tasks.

The Husqvarna 265RX is known for its robust power and durability, equipped with a high-performance 25.4 cc engine. This model features a unique X-Torq engine technology, which significantly reduces fuel consumption and emissions while delivering a high torque output. Its ergonomic design includes an adjustable handlebar and a lightweight build, ensuring user comfort even during extended use. The 265RX also comes with a Tap ‘n Go trimmer head, allowing for easy line advancement, saving time in the field.

Similarly, the Husqvarna 250R offers a balance of power and maneuverability, with a 25 cc engine and a well-balanced design. This model features an efficient air injection system that increases engine life by filtering out larger debris before it reaches the air filter. The 250R also incorporates a Smart Start system designed to make starting the machine effortless, reducing cord resistance during the start-up process.

The 252RX model enhances user experience with its lightweight frame and powerful engine. With a displacement of 25.4 cc, it provides high performance while minimizing fatigue during longer working hours. The 252RX is also equipped with an ergonomic handle, which can be adjusted to conform to the user’s height, promoting comfort and control.

The Husqvarna 240R is specially designed for residential users, featuring a 40 cc engine that strikes a balance between power efficiency and ease of use. Its low weight makes it ideal for routine maintenance tasks around the yard, while the automatic choke system ensures hassle-free starting, even in colder conditions.

Lastly, the Husqvarna 240F is an excellent choice for users who require versatility. This model is equipped with a robust 40 cc engine and a versatile attachment system that allows users to switch between different tools, enhancing its functionality. The 240F also includes a dual line head for improved cutting efficiency.

Together, these Husqvarna models showcase the brand’s commitment to innovation, performance, and user comfort, making them ideal choices for various applications in lawn care and landscaping. Whether for professional use or home gardening, Husqvarna's offerings remain at the forefront of outdoor power equipment technology.
Top Page Image Contents