Husqvarna 232R/RD 235R manual Assembly, Assembling the handlebars 225R/RD, 227R/RD, 232R/RD

Page 18

ASSEMBLY

Assembling the handlebars (225R/RD, 227R/RD, 232R/RD)

• Remove the screw at the rear of the throttle handle.

• Slide on the throttle handle on the right-hand side of the handlebars, (see the diagram).

•Align the hole in the throttle handle for the fixing screw with the hole on the handlebars.

•Refit the screw in the rear of the throttle handle.

• Fit the screw through the

throttle handle and the handlebars and tighten.

•Unscrew the handle from the handlebar bracket.

•Position the handlebars as shown. Fit the bracket components and tighten

the handle lightly.

• Put on the harness and hang the machine in the suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.

Assembling the handlebars (235R)

•Remove the screw at the rear of the throttle handle.

•Slide on the throttle handle on the right-hand side of the handlebars, (see the diagram).

•Align the hole in the throttle handle for the fixing screw with the hole on the handlebars.

• Refit the screw in the rear of the throttle handle.

• Fit the screw through the

throttle handle and the handlebars and tighten.

•Unscrew the bracket components from the handlebar bracket.

•Position the handlebars as

shown. Fit the bracket components and tighten the handle lightly.

•Fit the cabling as shown.

•Put on the harness and hang the machine in the

suspension hook. Now finely adjust so that the machine gives a comfortable working position when it‘s attached to the harness. Tighten the handle.

18 – English

Image 18

Contents 225R/RD/RJ 227R/RD 232R/RD 235R 101 89Symbol Explanation SymbolsContents Personal protective equipment Safety InstructionsMachine‘s safety equipment Throttle trigger lockAnti-vibration system Stop switchCutting attachment guard Quick-releaseMuffler Cutting equipmentLocking nut Throttle trigger lock Vibration damping system Cutting equipment Sharpening the grass blade Cutting equipmentSharpening the clearing blade Trimmer headStart General safety instructionsFuel safety Transport and storageBasic safety precautions General working instructionsAdjusting the harness and clearing saw Basic clearing techniquesDesignations Forestry clearing using a saw blade Clearing‘s ABCWorking methods Brush cutting using the saw blade Brush cutting using a grass bladeTrimming Grass clearing using the trimmer headClearing SweepingWhat is WHAT? What is what on the brushcutter?Assembly Assembling the handlebars 225R/RD, 227R/RD, 232R/RDAssembling the handlebars 235R Assembling the J-handlebars 225RJ Transport position, handlebars and J-handlebarsGrass blade Assembling other guards and cutting equipment Assembling the spray guard and trimmer head Trimmy SII 235RAdjusting the harness and clearing saw AssemblingDismantling Fuel Handling Fuel mixtureFuelling Start and Stop Control before startingStart and stop Maintenance CarburetorFinal setting of the idling speed T Correctly adjusted carburetorHigh speed needle Muffler Cooling systemTwo-part shaft Air filter Spark plugAngle gear Filing the grass bladeWeekly maintenance Maintenance scheduleDaily maintenance Monthly maintenanceTechnical Data Technical data 225RJ 225R/RD 227R/RDTechnical data 232R/RD 235R Type Cutting attachment Guard Art No Approved accessories 232R/RD Type Cutting attachmentApproved accessories 235R Type Cutting attachment Guard Ref NoFederal and California Emission Control Warranty Statement «*2~e5¥¬ English 1998W51