Husqvarna 227R/RD Stop switch, Cutting attachment guard, Anti-vibration system, Quick-release

Page 5

SAFETY INSTRUCTIONS

2. Stop switch

The stop switch should be used to stop the engine.

3.Cutting attachment guard

This guard is intended to prevent objects from being thrown towards the operator and to protect the operator from unintentionel contact with the cutting attachment.

!WARNING!

Do not attach any blade to the unit without proper installation of all required parts. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator and/or bystanders.

Under no circumstances may the cutting equipment be used without an approved guard fitted. See the chapter “Technical data” . If the wrong guard or a defective guard is fitted this can cause serious personal injury.

4.Anti-vibration system

Your machine is equipped with an anti-vibration system that has been designed to give as vibration-free and comfortable usage as possible.

The use of incorrectly wound cord or blunt, incorrect cutting equipment (incorrect type or incorrectly sharpened, see section “Filing the blade”) increases the level of vibration.

The machine’s vibration damping system reduces the transfer of vibrations between the engine unit/ cutting equipment and the machine’s handle unit.

!WARNING!

Over exposure to vibrations can result in blood-vessel or nerve injury to persons suffering with blood circulation problems. Seek medical attention if you experience physical symptoms that can be related to over exposure to vibrations. Examples of such symptoms are “numbness“, lack of feeling, “tickling“, “pricking“, “pain“, lack of or a reduction in normal strength, changes in the colour of the skin or its surfaces. These symptoms normally appear in the fingers, hands or wrists.

5.Quick-release

There is an easily accessible, quick-release catch fitted to the chest as a safety precaution in the event of a fire in the engine or for any other situation that requires you to free yourself from the machine and harness. See the section “Adjusting the harness and clearing saw“.

English – 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 101 89 225R/RD/RJ 227R/RD 232R/RD 235RSymbols Symbol ExplanationContents Machine‘s safety equipment Safety InstructionsPersonal protective equipment Throttle trigger lockCutting attachment guard Stop switchAnti-vibration system Quick-releaseLocking nut MufflerCutting equipment Throttle trigger lock Vibration damping system Cutting equipment Sharpening the clearing blade Cutting equipmentSharpening the grass blade Trimmer headFuel safety General safety instructionsStart Transport and storageGeneral working instructions Basic safety precautionsDesignations Adjusting the harness and clearing sawBasic clearing techniques Working methods Forestry clearing using a saw bladeClearing‘s ABC Brush cutting using a grass blade Brush cutting using the saw bladeClearing Grass clearing using the trimmer headTrimming SweepingWhat is what on the brushcutter? What is WHAT?Assembling the handlebars 235R AssemblyAssembling the handlebars 225R/RD, 227R/RD, 232R/RD Transport position, handlebars and J-handlebars Assembling the J-handlebars 225RJGrass blade Assembling the spray guard and trimmer head Trimmy SII 235R Assembling other guards and cutting equipmentDismantling Adjusting the harness and clearing sawAssembling Fuelling Fuel HandlingFuel mixture Start and stop Start and StopControl before starting Carburetor MaintenanceHigh speed needle Final setting of the idling speed TCorrectly adjusted carburetor Cooling system MufflerAngle gear Air filter Spark plugTwo-part shaft Filing the grass bladeDaily maintenance Maintenance scheduleWeekly maintenance Monthly maintenanceTechnical data 225RJ 225R/RD 227R/RD Technical DataTechnical data 232R/RD 235R Approved accessories 235R Type Cutting attachment Approved accessories 232R/RD Type Cutting attachmentType Cutting attachment Guard Art No Guard Ref NoFederal and California Emission Control Warranty Statement «*2~e5¥¬ English 1998W51
Top Page Image Contents