Husqvarna 227R, 227RD, 232R, 232RD, 235R manual Cutting attachment guard, Vibration damping system

Page 8

SAFETY INSTRUCTIONS

3.Cutting attachment guard

•Check that the guard is undamaged and not cracked.

•Replace the guard if it has been exposed to impact or is cracked.

•Always use the prescribed blade an guard combination, see chapter "Technical data".

4.Vibration damping system

•Check the vibration damping element regularly for material cracks and distortion.

•Check that the vibration damping element is undamaged and securely attached.

5. Muffler

1.Never use a machine that has a defective muffler.

2.Check regularly that the muffler is secure.

3.If your muffler is fitted with a spark arrest screen then it should be cleaned regularly. A blocked screen leads to the engine overheating with serious damage as a result. Never use a muffler with a defective spark arrest screen.

8 – English

Image 8

Contents 227R 227RD 232R 232RD 235R Symbol Explanation SymbolsContents Safety Instructions Machine‘s safety equipmentPersonal protective equipment Throttle trigger lockStop switch Cutting attachment guardAnti-vibration system Quick-releaseLocking nut MufflerCutting equipment Throttle trigger lock Vibration damping system Cutting equipment Cutting equipment Sharpening the clearing bladeSharpening the grass blade Trimmer headGeneral safety instructions Start Fuel safetyTransport and storage 10 ftBasic safety precautions General working instructionsDesignations Adjusting the harness and clearing sawBasic clearing techniques Working methods Forestry clearing using a saw bladeClearing‘s ABC Brush cutting using the saw blade Brush cutting using a grass bladeGrass clearing using the trimmer head and plastic knifes ClearingTrimming SweepingWhat is WHAT? What is what on the brushcutter?Transport position, handlebars AssemblyAssembling the handlebars 235R Assembling the blade guard and grass blade Assembling other guards and cutting equipment Assembling the spray guard and trimmer head Trimmy SII 235RDismantling Adjusting the harness and clearing sawAssembling Fuelling Fuel HandlingFuel Start and stop Start and StopControl before starting Maintenance CarburettorHigh speed needle H Final setting of the idling speed TCorrectly adjusted carburettor Angle gear MufflerCooling system Cleaning the air filter Air filter Spark plugTwo-part shaft Filing the grass bladeSharpening the clearing blade Maintenance scheduleDaily maintenance Weekly maintenance Monthly maintenanceTechnical Data Technical data 227R/RD 232R/RD 235RApproved accessories 235R Type EC declaration of conformity Applies to Europe only Super Auto Super Auto II Tri Cut Trimmy H Click Trimmy Hit Junior Trimmy Hit Pro ~ 3,5 m Trimmy SII 502 26 ´+H6¶6*¨ Page 114 00 2002W05