CONTENTS
!WARNING!
Under no circumstances may the design of the machine be modified without the permission of the manufacturer. Always use genuine accessories.
!WARNING!
The machine’s cutting equipment must under no circumstances be connected to other hydraulic units than what it is designed for.
!WARNING!
Only original cutting equipment must be connected to the hydraulic unit.
SYMBOL EXPLANATION |
|
Symbols | 2 |
CONTENTS |
|
Contents | 3 |
SAFETY INSTRUCTIONS |
|
Personal protective equipment | 4 |
The machine's safety equipment | 4 |
Control, maintenance and service of the machine's safety |
|
equipment | 6 |
Cutting equipment designed to minimise kickback | 7 |
Specification of blade and chain | 8 |
Sharpening your chain and adjusting raker clearance | 8 |
Tensioning the saw chain | 10 |
Chain lubrication | 10 |
Checking wear on cutting equipment | 11 |
General safety instructions | 12 |
General working instructions | 13 |
Basic safety precautions | 13 |
Basic clearing techniques | 14 |
WHAT IS WHAT? |
|
What is what on the machine? | 15 |
ASSEMBLY |
|
Connecting the hydraulic hoses | 16 |
Adapter | 16 |
Dismantling the hydraulic hoses | 16 |
Assembly of throttle handle | 16 |
FUEL HANDLING |
|
Petrol | 17 |
Twostroke oil | 17 |
Mixing | 17 |
Fuelling | 17 |
Hydraulic oil | 18 |
START AND STOP |
|
Cold engine | 18 |
Warm engine | 18 |
Stop | 18 |
Start | 19 |
Fitting the harness | 19 |
Removing the harness | 19 |
Quick release in case of hazard | 19 |
MAINTENANCE |
|
Carburettor | 20 |
Air filter | 21 |
Muffler | 21 |
Spark plug | 21 |
Cooling system | 22 |
Replacement of chain drive wheel | 22 |
Cleaning of the shaft | 22 |
Adjustment of the ball joint | 22 |
Maintenance schedule | 22 |
TECHNICAL DATA |
|
250 PS | 24 |
English – 3