Husqvarna 250PS manual Assembly, Adapter

ASSEMBLY

!WARNING!

The cutting equipment of the pruning saw may under no circumstances be connected to another type of hydraulic pump than what it is constructed for.

Connecting the hydraulic hoses

NOTE!

The hydraulic hoses and hydraulic oil tank’s quick- couplings must be clean and free from impurities.

Impurities in the hydraulic oil can result in malfunction of the hydraulic system.

Connect the hydraulic hoses’ quick-couplings with the hydraulic oil tank’s quick-couplings.

1.	Push in the locking
	sleeve on the quick
	coupling of the hydrau-
	lic tank inwards against
	the tank.
2.	Thereafter push in the
	quick coupling of the
	hydraulic hose into the
	quick coupling of the oil
	tank as far as possible.
3.	Release the locking

Check that the coupling snaps in correctly.

Lock the coupling by pushing the ring (A) from the tank and then turning it approx. 90°.

Dismantling the hydraulic hoses

Release the extra lock by turning the ring until it snaps back to the hydraulic tank. Push in the lock sleeve and pull out the hose’s quick-coupling.

NOTE!

Make sure the protecting plugs are mounted when the quick couplings are not connected.

A

	sleeve.
4.	Make sure the quick
	coupling connects
	securely.
5.	Carry out the same procedure for the connection of the
	other hydraulic hose.

Adapter
The shaft from the pruning
shears 235 P can also be
connected to 250 PS by
means of adapter 503 78 10-
01. Carefully check that
both couplings snap in
correctly. Connect the
hydraulic hose to the
adapter.
	A
Check that the lock ring (A)
has sprung in to the oil
tank. If not, turn the ring
until it does.
Now press the coupling ring
(B) to the oil tank. Connect
the hydraulic hose and	B
release the coupling ring.

Assembly of throttle handle

Snap the throttle handle onto the shaft.

The throttle handle can be moved forwards or backwards to obtain a comfortable working position.

16 – English