KEY to Symbols

Symbols

WARNING!

Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.

Always wear:

• Approved hearing protection

• Protective goggles or a visor

This product is in accordance with applicable

EC directives.

Cutting tool. Do not touch the tool without ﬁrst switching off the engine.

This machine is not electrically insulated. If the machine touches or comes close to high-voltage power lines it could lead to

death or serious bodily injury. Electricity can jump from one point to another by arcing. The higher the voltage, the

greater the distance electricity can jump. Electricity can also travel through branches and other objects, especially if

they are wet. Always keep a distance of at

least 10 m between the machine and high-voltage power lines and/or any objects that are touching them. If have to work within this safe distance you should always contact the relevant power company to make sure the power is switched off before you start work.

This machine can be dangerous! The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.

Arrows which show limits for handle positioning.

Always wear approved protective gloves.

Wear sturdy, non-slip boots.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is speciﬁed in chapter Technical data and on label.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

2 – English