Safety Instructions

Control, maintenance and service of the machineʼs safety equipment

IMPORTANT INFORMATION

•All service and repairs to the machine require special training.

•This applies especially to the machineʼs safety equipment. If the machine does not meet any of the controls listed below you should contact your serv- ice workshop.

•The purchase of one of our products guarantees that professional repair and servicing will be carried out on it. If the point of purchase is not one of our serv- icing dealers, please ask for details of the closest service workshop.

1.Throttle trigger

lock

•Check that the throttle is locked in the “idling position” when the throttle trigger lock is in its original position.

•Press in the throttle trigger lock and make sure it returns to its original position when released.

•Ensure that the throttle and

throttle trigger lock move eas- ily and that their return spring systems function.

3.Cutting attachment guard

•Ensure that the guard is un- damaged and is not cracked.

•Replace the guard if it has been exposed to impact or is cracked.

•Always use the prescribed blade and guard combination, see chapter "Technical data".

4.Vibration damping system

•Check the vibration damping element regularly for material cracks and distortion.

•Check that the vibration damping element is undam- aged and securely attached.

5. Mufﬂer

• See section "Start". Start the machine and apply full throttle. Release the throttle and check that the cutting equipment stops and remains at a standstill. If the cutting equipment rotates with the throttle in the idling position then the carburettorʼs idling setting must be checked. See chapter “Maintenance”.

2. Stop switch

•Start the engine and make sure that the engine stops when the stop switch is moved to the stop position.

1.Never use a machine that has a defective mufﬂer.

2.Check regularly that the mufﬂer is secure.

3.If your mufﬂer is ﬁtted with a spark arrest screen then it should be cleaned regularly. A blocked screen leads to the engine overheating with serious damage as a result. Never use a mufﬂer with a detec- tive spark arrest screen.

6 – English