Husqvarna 26HS75 Starting and Stopping, Check before starting, Starting and stopping, Cold engine

Page 12

STARTING AND STOPPING

Check before starting

•Inspect the working area. Remove any objects that could be thrown out.

•Check the cutting attachment. Never use blades that are dull, cracked or damaged.

•Check that the machine is in perfect working order. Check that all nuts and screws are tight.

•Make sure the gear housing is lubricated correctly. See instructions under the heading Gear housing.

•Check that the cutting attachment always stops when the engine is idling.

•Only use the machine for the purpose it was intended for.

•Make sure that the handle and safety features are in good working order. Never use a machine that lacks a part or has been modified outside its specifications.

•All covers must be correctly fitted and undamaged before you start the machine.

Starting and stopping

WARNING! The complete clutch cover and

!gear housing must be fitted before the machine is started, otherwise the clutch may come loose and cause personal injury.

Always move the machine about 3 metres from the refuelling position before starting. Place the machine on a firm surface. Remember that the blades may start to move when the engine is started. Make sure the blades cannot come into contact with any object. Make sure that no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury.

Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Cold engine

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

Choke: Set the choke control in the choke position.

A

Warm engine

Primer bulb: Press the air purge repeatedly until fuel begins to fill the bulb. The bulb need not be completely filled.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 326HS75X-series 326HS99X-series KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what?General Safety Precautions Personal protective equipmentMachine′s safety equipment Stop switchThrottle lockout Hand guard Vibration damping systemMuffler Gear housing Assembly of the catcher accessoryBlades Fuel safety Fuel HandlingFuel Fueling MixingStarting and Stopping Check before startingStarting and stopping Cold engineStarting StoppingSafety instructions regarding the surroundings Safety instructions while workingWorking Techniques General working instructionsSafety instructions after completing work Basic working techniquesMaintenance CarburetorFine adjustment of the idle speed T Correctly adjusted carburetorMuffler High speed jet HCleaning the air filter Cooling systemSpark plug Air filterGear housing Cleaning and lubricationMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical data´z+RDy¶5G¨ 22 English´z+RDy¶5G¨ Federal and California Emissions Control Warranty Statement 1150368-95 ´z+RDy¶5G¨ ´z+RDy¶5G¨

26HS75 specifications

The Husqvarna 26HS75 is a powerful and efficient hedge trimmer designed for both professional landscapers and avid gardeners. Known for its durability and stellar performance, it captures the essence of Husqvarna's commitment to delivering high-quality outdoor equipment.

One of the standout features of the Husqvarna 26HS75 is its robust engine. Powered by a reliable two-stroke engine, it provides enough power to tackle even the densest hedges with ease. The engine is designed for optimal fuel efficiency, reducing the need for frequent refueling and minimizing the environmental impact.

The cutting system of the 26HS75 is impressive, featuring a double-sided blade that can handle various trimming angles. With a blade length of 75 cm, it allows users to trim large hedges quickly while ensuring precision and cleanliness in cuts. The teeth spacing is engineered to handle both small twigs and thicker branches, making it versatile for different types of shrubs and hedges.

Comfort and usability are paramount in the design of the Husqvarna 26HS75. It boasts an ergonomic handle that reduces strain during extended use, ensuring that users can work for longer periods without discomfort. The innovative anti-vibration technology significantly minimizes vibrations transferred to the operator's hands, allowing for greater control and reducing fatigue.

Another feature that sets this hedge trimmer apart is its easy-start mechanism. Designed to simplify the starting process, this technology ensures that users can get to work quickly without the frustration often associated with starting small engines. Combined with a lightweight design, the 26HS75 is easy to maneuver, making it ideal for both intricate shaping and broader trimming tasks.

Safety is also a crucial aspect of the Husqvarna 26HS75. It comes equipped with a blade brake system that quickly stops the blade movement, minimizing the risk of accidents. Additionally, the transparent fuel tank allows users to easily monitor fuel levels, preventing unexpected downtime during work.

In conclusion, the Husqvarna 26HS75 is a top-tier hedge trimmer that combines power, efficiency, and user comfort. With its innovative features and sturdy construction, it is an excellent choice for anyone looking to maintain their garden or landscape with precision and ease. Husqvarna continues to set the benchmark for quality in outdoor equipment, making the 26HS75 a solid investment for garden care enthusiasts and professionals alike.
Top Page Image Contents