Husqvarna 323RJ manual Fitting other guards and cutting attachments

Page 12

ASSEMBLY

Fitting the blade guard/combination guard, grass blade and grass cutter

•Hook the blade guard/combination guard (A) onto the fitting on the shaft and secure with the bolt. CAUTION! Use the recommended blade guard. See the Technical data section.

Fitting other guards and cutting attachments

•Fit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (L).

G

D

F

E

A

B

 

C

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Place the blade (D), support cup (E) and support flange

(F) on the output shaft.

•Fit the nut (G). The nut must be tightened to a torque of 35-50 Nm (3.5-5 kpm). Use the socket spanner in the tool kit. Hold the shaft of the spanner as close to the blade guard as possible. To tighten the nut, turn the spanner in the opposite direction to the direction of rotation (Caution! left-hand thread).

•Fit the drive disc (B) on the output shaft.

•Turn the blade shaft until one of the holes in the drive disc aligns with the corresponding hole in the gear housing.

•Insert the locking pin (C) in the hole to lock the shaft.

•Screw on the trimmer head/plastic blades (H) in the opposite direction to the direction of rotation.

H

H

•To dismantle, follow the instructions in the reverse order.

12 – English

Page 11 Page 13
Image 12
Page 11 Page 13
Contents 323RJ 325RJX-SERIES KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the trimmer?General Safety Precautions Machine′s safety equipmentPersonal protective equipment Stop switch Throttle lockCutting attachment guard Vibration damping system Muffler Cutting equipment Locking nut Cutting equipment Sharpening grass cutters and grass blades Trimmer headAssembly Fitting the J-handleFitting blades and trimmer heads Fitting other guards and cutting attachments Fuel safety Fuel HandlingFuel Fueling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Basic safety rules Working TechniquesGeneral working instructions ABC of clearingGrass clearing using a grass blade Grass trimming with a trimmer headSweeping Maintenance CarburetorCorrectly adjusted carburetor MufflerHigh speed jet H Cleaning the air filter Cooling systemSpark plug Air filterBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Pro S35 25 m ´z+H@¶5G¨ Page 1140329-95 ´z+H@¶5G¨ ´z+H@¶5G¨
Top Page Image Contents