Husqvarna 323RJ manual Maintenance, Carburetor

Page 20

MAINTENANCE

Carburetor

Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in.To ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period, ask your dealer/service workshop (who will have a rev counter at their disposal) to adjust your carburettor.

WARNING! The complete clutch cover and

!shaft must be fitted before the machine is started, otherwise the clutch can come loose and cause personal injury.

Function

•The carburetor governs the engine’s speed via the throttle control. Air and fuel are mixed in the carburetor. The air/ fuel mixture is adjustable. Correct adjustment is essential to get the best performance from the machine.

•The setting of the carburetor means that the engine is adapted to local conditions, for example, the climate, altitude, fuel and the type of 2-stroke oil.

•The carburetor has three adjustment controls: L = Low speed jet

H = High speed jet

T = Idle adjustment screw

•The L and H-jets are used to adjust the supply of fuel to match the rate that air is admitted, which is controlled with the throttle. If they are screwed clockwise the air/fuel ratio becomes leaner (less fuel) and if they are turned anti- clockwise the ratio becomes richer (more fuel). A lean mixture gives a higher engine speed and a rich mixture gives a lower engine speed.

•The T-screw regulates the throttle setting at idle speed. If the T-screw is turned clockwise this gives a higher idle speed; turning it anti-clockwise gives a lower idle speed.

Basic setting

•The basic carburetor settings are adjusted during testing at the factory. The basic setting is richer than the optimal setting and should be maintained for the first few hours the machine is in use. The carburettor should then be finely adjusted. Fine adjustment should be carried out by a skilled technician.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti- clockwise until the cutting attachment stops.

Rec. idle speed 2700 rpm

Recommended max. speed: See the Technical data section.

WARNING! If the idle speed cannot be

!adjusted so that the cutting attachment stops, contact your dealer/service workshop. Do not use the machine until it has been correctly adjusted or repaired.

Fine adjustment

•When the machine has been ”run-in” the carburetor should be finely adjusted. The fine adjustment should be carried out by a qualified person. First adjust the L- jet, then the idling screw T and then the H-jet.

Conditions

•Before any adjustments are made, make sure that the air filter is clean and the air filter cover is fitted. If you adjust the carburettor when the air filter is dirty it will result in a leaner mixture when the filter is finally cleaned. This can lead to serious engine damage.

•Carefully turn both jets, L and H, so that they are midway between fully screwed in and fully screwed out.

•Do not attempt to adjust the L and H jets beyond either stop as this could cause damage.

•Now start the machine according to the starting instructions and let it warm up for 10 minutes.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti- clockwise until the cutting attachment stops.

Low speed jet L

Try to find the highest idling speed, turning the low speed needle L clockwise respectively counter-clockwise. When the highest speed has been found, turn the low speed needle L 1/ 4 turn counter-clockwise.

+ 1/4

L

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti- clockwise until the cutting attachment stops.

Fine adjustment of the idle speed T

Adjust the idle speed using the idle adjustment screw T, if it is necessary to readjust. First turn the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops. The idle speed is correctly adjusted when the engine

20 – English

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 323RJ 325RJX-SERIES KEY to Symbols SymbolsContents Introduction Dear customerWhat is WHAT? What is what on the trimmer?Personal protective equipment General Safety PrecautionsMachine′s safety equipment Cutting attachment guard Stop switchThrottle lock Vibration damping system MufflerCutting equipment Cutting equipmentLocking nut Sharpening grass cutters and grass blades Trimmer headFitting blades and trimmer heads AssemblyFitting the J-handle Fitting other guards and cutting attachments Fuel Fuel safetyFuel Handling Fueling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Basic safety rules Working TechniquesGeneral working instructions ABC of clearingGrass clearing using a grass blade Grass trimming with a trimmer headSweeping Maintenance CarburetorHigh speed jet H Correctly adjusted carburetorMuffler Cleaning the air filter Cooling systemSpark plug Air filterBevel gear Maintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsSuper Auto Super Auto II Page Trimmy H Click Trimmy Hit Pro S35 25 m ´z+H@¶5G¨ Page 1140329-95 ´z+H@¶5G¨ ´z+H@¶5G¨

323RJ specifications

The Husqvarna 323RJ is a versatile and efficient product designed for landscape professionals and homeowners alike. Renowned for its reliability and cutting performance, this trimmer is an excellent choice for tackling a variety of gardening tasks.

One of the standout features of the Husqvarna 323RJ is its powerful, lightweight engine. The 1.6 hp, 25 cc, 2-stroke engine delivers robust performance while maintaining excellent fuel efficiency. This ensures extended working times without the need for frequent refueling, making it a convenient choice for large areas.

A key technology integrated into the Husqvarna 323RJ is the Smart Start system. This innovative feature allows for easier start-up with minimal effort, reducing the resistance in the starter cord by up to 40%. This means that users can get to work quickly and efficiently, avoiding the frustration of difficult starts.

The machine is also designed with a low vibration system, significantly reducing operator fatigue during extended usage. This system utilizes a combination of anti-vibration dampeners and ergonomic design principles, ensuring that the user can work comfortably without excessive vibration-related stress.

The trimmer head is equipped with a Tap 'n Go feature, allowing users to easily release new line with a simple tap on the ground while mowing. This feature eliminates the need to stop work to manually adjust the line, streamlining the trimming process and improving overall efficiency.

The Husqvarna 323RJ incorporates a convenient adjustable handle that allows users to set the angle to their preference, ensuring comfortable operation regardless of height or reach. Additionally, the unit is equipped with a dual line cutting system, providing a wide cutting swath that enhances productivity.

Durability is a hallmark of the Husqvarna brand, and the 323RJ is no exception. Constructed with high-quality materials and built to withstand the rigors of frequent use, this trimmer is designed for longevity.

In summary, the Husqvarna 323RJ is ideal for those seeking a reliable, efficient, and comfortable trimmer. With features such as a lightweight and powerful engine, Smart Start technology, low vibration system, Tap 'n Go line release, and adjustable handle, it stands out as a top choice for anyone looking to maintain their garden effectively. Whether for professional landscaping or personal use, it promises to deliver exceptional performance and ease of use.
Top Page Image Contents