Fuel Handling

Fuel safety

Never start the machine:

1If you have spilt fuel on it. Wipe off the spillage and allow remaining fuel to evaporate.

2If you have spilt fuel on yourself or your clothes, change your clothes. Wash any part of your body that has come in contact with fuel. Use soap and water.

3If the machine is leaking fuel. Check regularly for leaks from the fuel cap and fuel lines.

Transport and storage

•Store and transport the machine and fuel so that there is no risk of any leakage or fumes coming into contact with sparks or naked ﬂames, for example, from electrical machinery, electric motors, electrical relays/switches or boilers.

•When storing and transporting fuel always use approved containers intended for this purpose.

•When storing the machine for long periods the fuel tank must be emptied. Contact your local petrol station to ﬁnd out where to dispose of excess fuel.

•Ensure the machine is cleaned and that a complete service is carried out before long-term storage.

•The transport guard must always be ﬁtted to the cutting attachment when the machine is being transported or in storage.

•In order to prevent unintentional starting of the engine, the spark plug cap must always be removed during long-term storage, if the machine is not under close supervision and when performing all service measures.

WARNING! Take care when handling fuel.

!Bear in mind the risk of ﬁre, explosion and inhaling fumes.

Fuel

CAUTION! The machine is equipped with a two-stroke engine and must always been run using a mixture of petrol and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

WARNING! Fuel and fuel fumes are highly

!inﬂammable and can cause serious injury when inhaled or allowed to come in contact with the skin. For this reason observe caution when handling fuel and make sure there is adequate ventilation.

Petrol

CAUTION! Always use a quality petrol/oil mixture at least 90 octane (RON). If your machine is equipped with a catalytic converter (see chapter on Technical data) always use a good quality unleaded petrol/oil mixture. Leaded petrol will destroy the catalytic converter.

Use low-emission petrol, also known as alkylate petrol, if it is available.

•The lowest octane recommended is 90 (RON). If you run the engine on a lower octane grade than 90 so-called knocking can occur. This gives rise to a high engine temperature, which can result in serious engine damage.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For best results and performance use HUSQVARNA two- stroke engine oil, which is specially formulated for our air- cooled two-stroke engines.

•Never use two-stroke oil intended for water-cooled engines, sometimes referred to as outboard oil (rated TCW).

•Never use oil intended for four-stroke engines.

•A poor oil quality and/or too high oil/fuel ratio may jeopardise function and decrease the life time of catalytic converters.

•Mixing ratio

1:50 (2%) with HUSQVARNA two-stroke oil.

1:33 (3%) with oils class JASO FB or ISO EGB formulated for air-cooled, two-stroke engines.

Petrol, litre	Two-stroke oil, litre

	2% (1:50)	3% (1:33)
	2% (1:50)	3% (1:33)

5	0,10	0,15

10	0,20	0,30

15	0,30	0,45

20	0,40	0,60

10 – English

323HD60, 325HD60X-Series, 325HD75X-Series specifications

The Husqvarna 323HD60, 325HD60X-Series, and 325HD75X-Series are cutting-edge hedge trimmers designed for professional landscapers and gardening enthusiasts alike. These powerful tools combine innovative technology with ergonomic design, making them efficient and comfortable to use for extended periods.

The Husqvarna 323HD60 is equipped with a robust 21.7 cc, 2-stroke engine, providing the power needed to tackle tough hedges. Its professional-grade build includes a dual-action blade that features hardened steel for improved durability and cutting efficiency. The cutting length of 60 cm allows users to manage taller hedges with ease, while the 28 mm tooth spacing ensures precise cutting even through larger branches.

Moving on to the 325HD60X-Series, this model enhances the user experience with an increased cutting length of 60 cm and an impressive 25.4 cc engine that offers higher performance. This series also introduces an advanced cooling system designed to extend engine life during demanding tasks. The user-friendly starting system minimizes effort, making these hedge trimmers accessible for all skill levels. Additionally, the 325HD60X features vibration dampening technology that significantly reduces fatigue, allowing for longer work sessions without discomfort.

For those requiring even more power, the 325HD75X-Series rises to the occasion. Featuring a powerful 25.4 cc engine and a longer 75 cm cutting blade, this model is perfect for larger hedges or intricate topiary work. The design includes an adjustable rear handle that allows for easy maneuvering and optimal control, making it suitable for both vertical and horizontal cuts. The dual-reciprocating cutting blades provide clean cuts and minimize the risk of damage to plants, leading to healthier growth.

Both the 325HD60X and 325HD75X-Series models incorporate Air Injection technology, which helps boost performance by keeping the air filter cleaner for longer periods. This results in reduced maintenance and extended intervals between servicing. Moreover, the intelligent design features a sturdy carrying strap, ensuring comfort during operation.

In summary, Husqvarna's 323HD60, 325HD60X-Series, and 325HD75X-Series hedge trimmers exemplify a blend of power, precision, and comfort. With advanced features like dual-action blades, vibration dampening, and efficient cooling systems, these tools are built for the demanding tasks faced by professionals and provide exceptional results in any landscaping project.